What have you done this year?
#1
14 Second Truck Club
Thread Starter
iTrader: (1)
Join Date: Feb 2003
Location: Beaumont TX
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
What have you done this year?
Well Im just about done for this year I know there is 3 more months but Ive spent all I want to spend this year.
-I have added a 2800 stall, vette servo to the trans
-gutted the cats,flowtech cutouts and bought the TPS tune (a waste).
-373 w/ locker
-spring clamps
-katzskin leather seat covers.
-10" mtx speakers and sub box
- and I just ordered a wait4me 93 octane tune and a transcooler
- the only other item I am going to purchase is DR tires for the track
What has everone else done this year?
-I have added a 2800 stall, vette servo to the trans
-gutted the cats,flowtech cutouts and bought the TPS tune (a waste).
-373 w/ locker
-spring clamps
-katzskin leather seat covers.
-10" mtx speakers and sub box
- and I just ordered a wait4me 93 octane tune and a transcooler
- the only other item I am going to purchase is DR tires for the track
What has everone else done this year?
Last edited by 02chevyracing; 09-13-2005 at 01:42 PM.
#2
TECH Addict
iTrader: (5)
Join Date: Nov 2004
Location: Georgia
Posts: 2,533
Likes: 0
Received 0 Likes
on
0 Posts
long tubes
2 cams
918s
shift kit
4 nelson tunes
3.73's
elec fans
put cai on then took off
3000 stall
pulled head to get lifter out of block
only thing i got left to do is install all my parts
2 cams
918s
shift kit
4 nelson tunes
3.73's
elec fans
put cai on then took off
3000 stall
pulled head to get lifter out of block
only thing i got left to do is install all my parts
#3
Gauges, stainless billet grill, servos, tune, volant, Line X'd the bed (under rails), tinted driver / pass side windows, installed iPod controller to stock radio. Shift kit is sitting on the garage floor waiting to go in.
Next year its 2/4 drop and I am done with this rig all together and on to my Chevelle where my heart really lies. Just building a nice running rig that once I am done I do not have to keep toying with. Just want to drive it, haul my dogs and parts for the Chevelle.
Next year its 2/4 drop and I am done with this rig all together and on to my Chevelle where my heart really lies. Just building a nice running rig that once I am done I do not have to keep toying with. Just want to drive it, haul my dogs and parts for the Chevelle.
#5
TECH Fanatic
iTrader: (5)
Join Date: Oct 2003
Location: San Angelo, Texas
Posts: 1,230
Likes: 0
Received 0 Likes
on
0 Posts
18s, built 4L60e with shift kit and vette servo, grille, LS1 fans, Pacesetters and y-pipe. Those were some of the big things for this year. Also spent entirely too much money on my truck yet at the same time not enough.
#6
FormerVendor
iTrader: (6)
Join Date: Nov 2004
Location: BERRIEN CENTER,MICHIGAN
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
Powerdyne supercharger-intercooled ( removed from truck after 4 months)
Yank tt3000
Nelson tune
vette servos
05 efans
NX wet kit
MSD plug wires
NGK TR6's
Not done just yet this year.
Yank tt3000
Nelson tune
vette servos
05 efans
NX wet kit
MSD plug wires
NGK TR6's
Not done just yet this year.
Trending Topics
#8
TECH Junkie
iTrader: (2)
heads: milled .050, bigger valves, unshrouding, competition 5 angle valve job, 918's, ferrea valves
cam: LPE gt2-5 222 .566 112
intake:AEM
stall: TCI streetfighter
exhaust: changed muffler twice, welded up y pipe with mandrel bends, flowmaster y pipe, cutout
Tunes: nelson tune-mailorder, jeff creech tune-dyno tune, now Hp tuners-the ****
headers:thorley's
tires: indy 500's
injectors:31 lb/hr
pushrods:cv chromemolly hardened
shift kit: trans go
rebuilt tranny: under warranty
escalade ins cluster
Getting ready to put a breather in place of pcv and cap pcv/intake tube
Ive spent too much money on this thing
cam: LPE gt2-5 222 .566 112
intake:AEM
stall: TCI streetfighter
exhaust: changed muffler twice, welded up y pipe with mandrel bends, flowmaster y pipe, cutout
Tunes: nelson tune-mailorder, jeff creech tune-dyno tune, now Hp tuners-the ****
headers:thorley's
tires: indy 500's
injectors:31 lb/hr
pushrods:cv chromemolly hardened
shift kit: trans go
rebuilt tranny: under warranty
escalade ins cluster
Getting ready to put a breather in place of pcv and cap pcv/intake tube
Ive spent too much money on this thing
#9
PT's Slowest Truck
iTrader: (19)
this year for go:
05 efans, 34" rad, Nelson harness, 160* stat
PCM updated for efans (PCM4Less)
145amp alt...(ran wire and turned off flashing battery light from 99-02 PCM swap!)
removed K&N and installed Volant
removed Comp 915's and installed 02 LS6's and Harland Sharps
minor repairs and maintenance
bought a 6.0... hopefully be done next year
for show/gadget fun:
removed jump seat and installed full length center console
Legacy neoprene seat covers
Infinity Basslink
Gentek auto dimming rear-view w/ outside temp and compass
removed grille fins behind speed grille
03-05 tail lenses
replaced stolen valve stem caps numerous times (kharma works!)
05 efans, 34" rad, Nelson harness, 160* stat
PCM updated for efans (PCM4Less)
145amp alt...(ran wire and turned off flashing battery light from 99-02 PCM swap!)
removed K&N and installed Volant
removed Comp 915's and installed 02 LS6's and Harland Sharps
minor repairs and maintenance
bought a 6.0... hopefully be done next year
for show/gadget fun:
removed jump seat and installed full length center console
Legacy neoprene seat covers
Infinity Basslink
Gentek auto dimming rear-view w/ outside temp and compass
removed grille fins behind speed grille
03-05 tail lenses
replaced stolen valve stem caps numerous times (kharma works!)
#10
TECH Senior Member
iTrader: (8)
Join Date: Sep 2004
Location: Houston, Texas
Posts: 6,411
Likes: 0
Received 0 Likes
on
0 Posts
this year so far:
custom tune from "wait4meperformance".
took flowmaster off an installed a borla.
removed cats.
installed K&N FIPK
next month:
install cam/spings
TB converter
vette servo's
maybe a G80??? got the one wheel peel right now!!
that's about it for this year,
I think I'll start working on the looks next year....
custom tune from "wait4meperformance".
took flowmaster off an installed a borla.
removed cats.
installed K&N FIPK
next month:
install cam/spings
TB converter
vette servo's
maybe a G80??? got the one wheel peel right now!!
that's about it for this year,
I think I'll start working on the looks next year....