What's my used 6.0L and maggie 112 worth?
#1
What's my used 6.0L and maggie 112 worth?
I wasn't sure where to put this thread. I didn’t want to put it in the sale section because I didn’t want it viewed as a “Feeler” thread.
Anyway, here are the details. Just wondering what I might be able to get for it if I leave it as listed here and don’t rape any parts off it.
2005 LQ4 Block and rotating assembly w/317 heads. All bought brand new in 2006 (Zero miles)
Now has Approx 40K miles
Compression test was good at 180psi (+ or – a few psi) in all cylinders
Katech rod bolts
ARP head bolts
317 heads with Crane dual springs good to .600
7.4 hardened push rods
Crank is pinned, will leave the balancer on.
GT2-3 camshaft
High vol oil pump
Oil pan included
*NO accessories, intake manifold, or flex plate*
Also, I will have a Magnacharger M112 head unit 4 sale, about 50k on it. The blower and manifold w/fuel rails and 42# green top injectors only. What is that worth?
Anyway, here are the details. Just wondering what I might be able to get for it if I leave it as listed here and don’t rape any parts off it.
2005 LQ4 Block and rotating assembly w/317 heads. All bought brand new in 2006 (Zero miles)
Now has Approx 40K miles
Compression test was good at 180psi (+ or – a few psi) in all cylinders
Katech rod bolts
ARP head bolts
317 heads with Crane dual springs good to .600
7.4 hardened push rods
Crank is pinned, will leave the balancer on.
GT2-3 camshaft
High vol oil pump
Oil pan included
*NO accessories, intake manifold, or flex plate*
Also, I will have a Magnacharger M112 head unit 4 sale, about 50k on it. The blower and manifold w/fuel rails and 42# green top injectors only. What is that worth?
#6
Kind of where I was leaning, maybe a tad more for the motor since I see lesser equipped motors asking $1200-$1500.
Even used I could get... cam ($275), head bolts ($100), rod bolts ($150), push rods ($75) and oil pan ($50)
So $650 in upgraded parts even at used prices and I'm not counting the springs because I'd never pull them off and resell them. I'd probably ask $1800 for the motor and the blower at $1500 sounds about right.
I wanted some feedback so I dont list it and get flamed for my price...:nunchuk1:
Even used I could get... cam ($275), head bolts ($100), rod bolts ($150), push rods ($75) and oil pan ($50)
So $650 in upgraded parts even at used prices and I'm not counting the springs because I'd never pull them off and resell them. I'd probably ask $1800 for the motor and the blower at $1500 sounds about right.
I wanted some feedback so I dont list it and get flamed for my price...:nunchuk1:
Trending Topics
#8
TECH Fanatic
Join Date: Jul 2005
Location: Galesburg Il
Posts: 1,396
Likes: 0
Received 0 Likes
on
0 Posts
I hope you don't mind if I jump in... but what's an entire polished mp112 set up, including the intercooler radiator/pump etc, worth? About 12 k on it. Stock and 2.8" pulleys. Thanks. Jim