00ChevyScott

iTrader: (10)

Where can I pick some up?

How long do they have to be and what size? wood or metal?

viciousknid

iTrader: (8)

Ace hardware or any building supply store.
Longer than your cam of course, about as big around as your pinky is fine. Wood's cheaper.

LMSeven

iTrader: (3)

If I remember right 5/8". Search button...

kbracing96

iTrader: (26)

They need to be 3/8 diameter, wood dowels is easiest to work with. You need to sand a flat edge on the dowel until it just fits snugly in the the oil galley. If it fits loosely then your really doing the Russian roulette way, as the lifter can still fall out.

viciousknid

iTrader: (8)

3/8 that's it. if you were around here i'd give you a couple. I have like 4 of em that are 3ft long

LMSeven

iTrader: (3)

^^^ Thanks for correcting me guys, I knew it was something 8'ths

gao8302

iTrader: (13)

I have always used 5/16 wooden dowels. 3/8 wouldnt fit. I have never had a problem with the 5/16.

chevyguy7802

iTrader: (3)

Ive seen the wood dowels at walmart in the craft section......

gao8302

iTrader: (13)

JFWY.

Any do it your self center will have them

00Silv4.8

iTrader: (10)

I used pen magnets but when u buy the decent sized ones that dont break as easy it gets kinda pricey in my opinion for something u'll use a handful of times haha