05 Silverado RCSB supercharged / 4L80E for sale.
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jan 2009
Location: Ft. Worth, TX
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
SOLD!!! 05 Silverado RCSB supercharged / 4L80E for sale.
SOLD!!!
Ok so I have to sell my baby... It has a lot of upgrades and runs great! i was recently involved in an accident that messed up the drivers side fender, grille, and hood... so i ripped the whole front clip off and was about to replace it with the 06-07 front clip. Since the wife is not interested in me keeping it anymore, basically I got the ultimatum: HER OR THE TRUCK... i really had to think lol. It runs and drives great and just got it off the dyno the day before the accident and it was making 530 RWHP and 620 RWTQ on 8* timing! so the power potential is there.
The truck only has 77,000 miles on it, and drives SO SMOOTH!
Interior:
* Premier CD deck with usb inputs, remote, and iphone connectivity.
* 4 infinity speakers
* 2 JL 10" subs in custom box (you can put the seat all the way back)
* the middle jump seat has been removed as i used to have a bottle there.
* dash installed AFR gauge in the cubby hole
* recalled speedometer problem fixed
* recalled blower motor fixed
* AC blows cold
* Heater works great
Extreior:
* factory "Dark Blue Metallic" paint
* Roll pan with the option for a hide away receiver hitch
* Joe Gibbs 20" rims + one Joe Gibbs 20" spare. (one tire was damage in the accident)
* newer falken ziex 04 tires, spare tire not that great. but it will get you out of a bind
* also will come with 2 16", 10" wide aluminum rims with MT's mounted on them.
* There are a few dents and dings on the passenger side and on the drivers side bed.
* the doors shut / open flawlessly
Drivetrain:
* 6.0L LQ9 stock (30,000 miles)
* Lunatti voodoo custom ground cam (brand new)
* LS7 lifters (brand new)
* PRC Hardened Pushrods (brand new)
* 317 heads with PRC double springs, and upgraded trunion rockers (brand new)
* Magnuson TVS 1900 supercharger with heat exchanger and pump.
* 90 mm LS2 /LS3 throttle body
* X-link conversion harness
* volant ram air intake, box, and filter.
* all 8-rib Inovators west pullies with extra sizes of belts and blower pullies (brand new)
* the crank is pinned
* Aeromotive FPR
* Walbro 340 fuel pump (brand new)
* electric fans
* TR7 pliugs (brand new
* AEM AFR wideband
* AC delco O2 sensors (brand new)
* Pacesetter long tube headers and ORY (3")
* borla Pro XS 3" muffler
* 4L80E built by Chase Dooley
* yank SC 3200 stall
* large tranny cooler
* all 4L80E conversion was done right and all the harneses were used as plug n play so you could go back to a 60E if you wanted to.
* custom length drive shaft
* Posi 3.23 rear end (works GREAT!)
* Professional built catch can and done right, with AN fittings
* I also had a professional clean up all the wiring and such...
* Tuned by SNL Performance
All in all im really sad to let it go and will entertain the parting the truck of the motor and transmission... but only if i have a buyer for all these things... the i will sell the truck as a roller. but all it needs to drive is a front clip and new drivers side tire.
I am flexible on shipping...
asking 11,000 obo... I have a lot more than that in the performance alone.
I am always interested in full or partial trades... Guns/Ammo, 4 wheelers, side by sides, 4X4 trucks and SUV's...
You can call or text offers or questions @ 325-660-5550
Ok so I have to sell my baby... It has a lot of upgrades and runs great! i was recently involved in an accident that messed up the drivers side fender, grille, and hood... so i ripped the whole front clip off and was about to replace it with the 06-07 front clip. Since the wife is not interested in me keeping it anymore, basically I got the ultimatum: HER OR THE TRUCK... i really had to think lol. It runs and drives great and just got it off the dyno the day before the accident and it was making 530 RWHP and 620 RWTQ on 8* timing! so the power potential is there.
The truck only has 77,000 miles on it, and drives SO SMOOTH!
Interior:
* Premier CD deck with usb inputs, remote, and iphone connectivity.
* 4 infinity speakers
* 2 JL 10" subs in custom box (you can put the seat all the way back)
* the middle jump seat has been removed as i used to have a bottle there.
* dash installed AFR gauge in the cubby hole
* recalled speedometer problem fixed
* recalled blower motor fixed
* AC blows cold
* Heater works great
Extreior:
* factory "Dark Blue Metallic" paint
* Roll pan with the option for a hide away receiver hitch
* Joe Gibbs 20" rims + one Joe Gibbs 20" spare. (one tire was damage in the accident)
* newer falken ziex 04 tires, spare tire not that great. but it will get you out of a bind
* also will come with 2 16", 10" wide aluminum rims with MT's mounted on them.
* There are a few dents and dings on the passenger side and on the drivers side bed.
* the doors shut / open flawlessly
Drivetrain:
* 6.0L LQ9 stock (30,000 miles)
* Lunatti voodoo custom ground cam (brand new)
* LS7 lifters (brand new)
* PRC Hardened Pushrods (brand new)
* 317 heads with PRC double springs, and upgraded trunion rockers (brand new)
* Magnuson TVS 1900 supercharger with heat exchanger and pump.
* 90 mm LS2 /LS3 throttle body
* X-link conversion harness
* volant ram air intake, box, and filter.
* all 8-rib Inovators west pullies with extra sizes of belts and blower pullies (brand new)
* the crank is pinned
* Aeromotive FPR
* Walbro 340 fuel pump (brand new)
* electric fans
* TR7 pliugs (brand new
* AEM AFR wideband
* AC delco O2 sensors (brand new)
* Pacesetter long tube headers and ORY (3")
* borla Pro XS 3" muffler
* 4L80E built by Chase Dooley
* yank SC 3200 stall
* large tranny cooler
* all 4L80E conversion was done right and all the harneses were used as plug n play so you could go back to a 60E if you wanted to.
* custom length drive shaft
* Posi 3.23 rear end (works GREAT!)
* Professional built catch can and done right, with AN fittings
* I also had a professional clean up all the wiring and such...
* Tuned by SNL Performance
All in all im really sad to let it go and will entertain the parting the truck of the motor and transmission... but only if i have a buyer for all these things... the i will sell the truck as a roller. but all it needs to drive is a front clip and new drivers side tire.
I am flexible on shipping...
asking 11,000 obo... I have a lot more than that in the performance alone.
I am always interested in full or partial trades... Guns/Ammo, 4 wheelers, side by sides, 4X4 trucks and SUV's...
You can call or text offers or questions @ 325-660-5550
Last edited by $nake Charmer; 05-05-2013 at 09:25 PM.
#3
11 Second Club
iTrader: (7)
Join Date: Mar 2008
Location: Lubbock, Tx
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
I would assume you probably aren't interested in a trade for a GMC 2007.5 Duramax CCSB?
If not, good luck with sale...and hopefully if my truck sells quick enough we'll be talking again.
If not, good luck with sale...and hopefully if my truck sells quick enough we'll be talking again.
#7
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jan 2009
Location: Ft. Worth, TX
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Price drop $10,000 obo. I've got almost double that in it!
And if someone can show me how to post videos I have some from the dyno just before the accident or I can just text them to you via text or email.
And if someone can show me how to post videos I have some from the dyno just before the accident or I can just text them to you via text or email.
Trending Topics
#9
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jan 2009
Location: Ft. Worth, TX
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
If I have a buyer for the trans mission at the same time... I thought about just selling the motor and putting the motor back stock, but that's a lot of mass for a 5.3 to move around lol... Back to stock not a Turd! Lol
Last edited by $nake Charmer; 03-24-2013 at 12:14 PM.