08' tbss $25,000 obo
#1
08' tbss $25,000 obo
Been kicking the idea around for almost a year now, time to throw it out there... For sale. 08' TBSS approx 18k miles. Doesn't have a motor, I'm using it on the new project (sorry, it's been too good to me).
Here is what is for sale: pretty much everything but the long block/engine, intake, injectors, fuel rails, engine sensors, engine harness, 411 ecm and catch can setup. Willing to keep other parts to make the deal work also, just PM me. All work done at DB Rods shop in Taylor, TX.
08' TBSS Red Jewel, minor scratches on the rear bumper . Other than that paint is great. Electric windows/sunroof works, locks, lights, horn etc. Has a current inspection. Has been low 9's many times and is capable of high 8's. All that is needed is a 4xx" motor, intake, injectors, engine harness, ecm, sensors, PCV system. 1.35 60 ft, 5.8@123 1/8th, 9.03@151 bests at the track.
Mods:
Turbo kit capable of 1000+ hp.
Hot side: Custom headers to T4 flange, twin MP 76mm .96ar turbos, comes with oil feeds and return lines that return to TBSS Moroso oil pan, 2 Tial 38mm w/g with 10# springs, 4" alum downpipes with 3 o2 bungs ports. Cold side: Bell I/C supports 1400hp and all piping (may need some added on to fit your intake of choice), includes IAT sensor bung also. Turbo smart dual man. boost controller w/ everything hooked up except intake fittings.
Fuel system:
22 gallon alum fuel cell, 2 Eliminator pumps, all supply/return fuel lines included plus eliminator pro regulator. Setup to support big power on e85 and race gas.
Transmission/driveline: (Willing to keep transmission possibly)
TH400 with hipster T/Brake (refreshed w/ 4 passes and around 100 miles on it), B&M pro ratchet shifter, N Chance converter, trans cooler w/ fan, Denny's chromoly driveshaft, 14 bolt, T/A girdle, forged dutchman axles, custom adjustable 4 link with dbl adjustable coilovers, RJ race cars sway bar. Front has dbl adjustable coilovers also, straps, DJM lowering arms.
Wheels:
20" stockers with factory RSA's. Drag setup: Boze 17x7-17x10 with 235 hankooks up front and M&H racemaster 390's in the rear (4 track passes and 100 miles).
Misc:
Autometer gauges including Speedo, tach, oil pressure, engine temp, fuel level, fuel pressure, boost , AFR, and trans temp... All sending units included. Lingenfelter 2 step, 8 point chromoly cage, window net, 2-Simpson 5 point harness belts, 2 Kirkey front seats and 2 sportsman rear seats, master cutoff mounted in the rear. Battery relocated to rear hatch area. Afco radiator, Meziere remote water pump with water lines and blocks to mount to block, electric fan on radiator. I'm sure I'm forgetting something... just ask please!
drag wheel setup
Here is what is for sale: pretty much everything but the long block/engine, intake, injectors, fuel rails, engine sensors, engine harness, 411 ecm and catch can setup. Willing to keep other parts to make the deal work also, just PM me. All work done at DB Rods shop in Taylor, TX.
08' TBSS Red Jewel, minor scratches on the rear bumper . Other than that paint is great. Electric windows/sunroof works, locks, lights, horn etc. Has a current inspection. Has been low 9's many times and is capable of high 8's. All that is needed is a 4xx" motor, intake, injectors, engine harness, ecm, sensors, PCV system. 1.35 60 ft, 5.8@123 1/8th, 9.03@151 bests at the track.
Mods:
Turbo kit capable of 1000+ hp.
Hot side: Custom headers to T4 flange, twin MP 76mm .96ar turbos, comes with oil feeds and return lines that return to TBSS Moroso oil pan, 2 Tial 38mm w/g with 10# springs, 4" alum downpipes with 3 o2 bungs ports. Cold side: Bell I/C supports 1400hp and all piping (may need some added on to fit your intake of choice), includes IAT sensor bung also. Turbo smart dual man. boost controller w/ everything hooked up except intake fittings.
Fuel system:
22 gallon alum fuel cell, 2 Eliminator pumps, all supply/return fuel lines included plus eliminator pro regulator. Setup to support big power on e85 and race gas.
Transmission/driveline: (Willing to keep transmission possibly)
TH400 with hipster T/Brake (refreshed w/ 4 passes and around 100 miles on it), B&M pro ratchet shifter, N Chance converter, trans cooler w/ fan, Denny's chromoly driveshaft, 14 bolt, T/A girdle, forged dutchman axles, custom adjustable 4 link with dbl adjustable coilovers, RJ race cars sway bar. Front has dbl adjustable coilovers also, straps, DJM lowering arms.
Wheels:
20" stockers with factory RSA's. Drag setup: Boze 17x7-17x10 with 235 hankooks up front and M&H racemaster 390's in the rear (4 track passes and 100 miles).
Misc:
Autometer gauges including Speedo, tach, oil pressure, engine temp, fuel level, fuel pressure, boost , AFR, and trans temp... All sending units included. Lingenfelter 2 step, 8 point chromoly cage, window net, 2-Simpson 5 point harness belts, 2 Kirkey front seats and 2 sportsman rear seats, master cutoff mounted in the rear. Battery relocated to rear hatch area. Afco radiator, Meziere remote water pump with water lines and blocks to mount to block, electric fan on radiator. I'm sure I'm forgetting something... just ask please!
drag wheel setup
Last edited by dbtbss; 03-23-2012 at 06:05 PM. Reason: pics added
Thread
Thread Starter
Forum
Replies
Last Post