2001 RCSB Green 5.3(Cammed)
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Aug 2005
Location: Jxn, Miss
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
2001 RCSB Green 5.3(Cammed)
I am the second owner of this truck, I have fixed most all of the issues with this truck. Its a great, quick truck. A blast to drive and runs some mid-low 13's depending on the tire. I was going to spray it but decided I would wait because I have my eye on another vehicle that I would like to have.
Issues when I purchased the truck were:
A lean code..... this was fixed by removing a catch can that was set up wrong and vented to the atmosphere.
Next was the wiring with the fans (this was cosmetic) but I couldn't stand it so I rewired the fans to look stock. (800 dollar flex a lite set up).
I painted the tailgate and roll pan but still needs a professional touch, and the roof has a little clear peeling, I will add pictures of this as soon as the rain is gone. I want to be upfront about this before someone drives 8 hours to see this truck in person. It is a straight clean truck with these minor issues but mechanically its perfect!
mods include
Engine:
5.3 comp 224/230, 588, 114 lsa cam, new style comp 918 springs, comp hardened pushrods, rocker arms off of a 07 5.3, LS2 injectors
Pacesetter ceramic long tube headers, ORY pipe,
MSD plug wires
Electric fans from FLex-a-lite
Larger than stock trans cooler
KN air intake with AEM dry flow filter
ARP crank bolt
DMH 3" electric cutout with switch in the cab
Drivetrain:
Fully Built 4L60E from Wiley transmission in Round Rock same guys who built DB Rods trans, Yank TT 3000 stall with ARP converter bolts, CAT racing SFI Flex plate with ARP bolts
custom steel drive shaft from Inland Truck parts in Austin,tx
upgraded spicer u-joints and straps
fully rebuilt rear end with all new bearing and seals, 3.73 gears, Detroit True-Trac posi
Bear rotors up front with Hawk Fero carbon pads, new stock rotors and pads out back, Russel stainless brake lines front and rear,
Suspension:
Hotchkis sway bars front and rear, Hotchkis 2 inch drop coils up front with Beltech 4 inch drop in rear via front spring buckets and shackles along with shock extenders, Edelbrocks IAS shocks front and rear, Recently rebuilt entire front suspension April of 2011, HUBS, BALL JOINTS, TIE RODS ALONG WITH GOOD ALIGNMENT
Rolling stock:
Nissan wheels painted flat black with clear coat on top, Pirelli P-zero Rosso 255-55-18's in front less than 2k miles yokohama Advan st 285-50-18's in rear
Body mods:
shaved tail gate is painted (could use a professional job),sir michaels roll pan as well
10% window tint on front 5% on rear window,
interrior is clean non smoker no burns, factory cd player, dash light swapped to green led's, auto meter fuel pressure gauge, stock chrome grill has been sanded n painted black, new head light housing and marker lights. cant think of anything else, shoot me a pm if your interested.
I want to be up front about the truck..... the only thing it needs is cosmetic. The roof needs to be cleared, and the tailgate and rollpan need a professional body man. Other than that I have been daily driving the truck and its a blast. I am open to offers for trade as well. Considering a Side by side (can am, razr, ranger) maybe a clean fbody...... heck just shoot me a pm if you have something and I will be happy to look!
Willing to deliver within reasonable distance, buyer will pay the cost of delivery (gas, hotel, return trip). Asking 8k obo
truck has 131,xxx and changes cause I do drive the truck.
Issues when I purchased the truck were:
A lean code..... this was fixed by removing a catch can that was set up wrong and vented to the atmosphere.
Next was the wiring with the fans (this was cosmetic) but I couldn't stand it so I rewired the fans to look stock. (800 dollar flex a lite set up).
I painted the tailgate and roll pan but still needs a professional touch, and the roof has a little clear peeling, I will add pictures of this as soon as the rain is gone. I want to be upfront about this before someone drives 8 hours to see this truck in person. It is a straight clean truck with these minor issues but mechanically its perfect!
mods include
Engine:
5.3 comp 224/230, 588, 114 lsa cam, new style comp 918 springs, comp hardened pushrods, rocker arms off of a 07 5.3, LS2 injectors
Pacesetter ceramic long tube headers, ORY pipe,
MSD plug wires
Electric fans from FLex-a-lite
Larger than stock trans cooler
KN air intake with AEM dry flow filter
ARP crank bolt
DMH 3" electric cutout with switch in the cab
Drivetrain:
Fully Built 4L60E from Wiley transmission in Round Rock same guys who built DB Rods trans, Yank TT 3000 stall with ARP converter bolts, CAT racing SFI Flex plate with ARP bolts
custom steel drive shaft from Inland Truck parts in Austin,tx
upgraded spicer u-joints and straps
fully rebuilt rear end with all new bearing and seals, 3.73 gears, Detroit True-Trac posi
Bear rotors up front with Hawk Fero carbon pads, new stock rotors and pads out back, Russel stainless brake lines front and rear,
Suspension:
Hotchkis sway bars front and rear, Hotchkis 2 inch drop coils up front with Beltech 4 inch drop in rear via front spring buckets and shackles along with shock extenders, Edelbrocks IAS shocks front and rear, Recently rebuilt entire front suspension April of 2011, HUBS, BALL JOINTS, TIE RODS ALONG WITH GOOD ALIGNMENT
Rolling stock:
Nissan wheels painted flat black with clear coat on top, Pirelli P-zero Rosso 255-55-18's in front less than 2k miles yokohama Advan st 285-50-18's in rear
Body mods:
shaved tail gate is painted (could use a professional job),sir michaels roll pan as well
10% window tint on front 5% on rear window,
interrior is clean non smoker no burns, factory cd player, dash light swapped to green led's, auto meter fuel pressure gauge, stock chrome grill has been sanded n painted black, new head light housing and marker lights. cant think of anything else, shoot me a pm if your interested.
I want to be up front about the truck..... the only thing it needs is cosmetic. The roof needs to be cleared, and the tailgate and rollpan need a professional body man. Other than that I have been daily driving the truck and its a blast. I am open to offers for trade as well. Considering a Side by side (can am, razr, ranger) maybe a clean fbody...... heck just shoot me a pm if you have something and I will be happy to look!
Willing to deliver within reasonable distance, buyer will pay the cost of delivery (gas, hotel, return trip). Asking 8k obo
truck has 131,xxx and changes cause I do drive the truck.
Last edited by lownslo; 05-08-2012 at 10:26 AM.