2003 RCSB Silverado 6.0/4L80E/Turbo/Cam
11-04-2012, 01:20 PM
#1
TECH Resident
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Houston
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
2003 RCSB Silverado 6.0/4L80E/Turbo/Cam
2003 Regular Cab Short Bed Silverado for sale
Engine is a 6.0L with 60#/hr injectors, 60,XXX miles on the engine. It has a Master Power 70mm turbo, with inter cooler. Also has a Comp blower cam, specs on it are 232/240 .595/.608 on 115 LSA. Current boost level is 10 psi, the truck has a boost controller capable of adjustments to 16 psi based on current waste gate spring rate (and tune). Professionally tuned *locked* PCM (Nelson performance), so if you want to do your own tuning I will supply an extra PCM. Walbro 255lph fuel pump in the tank. LS1 electric fans. QTP electric cutout.
Transmission is a 4L80E with a 3,000 rpm converter.
Rear differential has TruTrac installed (posi trac).
Truck has approximately 138,XXX miles on it.
The body is in fair condition, with a few dings on the bumpers along with scratches. Comes with 20" wheels. Interior is all black, cloth seats, power windows/doors/mirrors. I bought the truck lowered, so I am unsure of its exact specs. The truck bed is Rhino Lined.
I am asking $12,500 OBO
In the video I slowly gave it throttle, because if you just stomp on it it’s even harder to get traction
I’m hoping to get it on the dyno this upcoming week to see what power it is making. I have not taken it to the track.
Engine is a 6.0L with 60#/hr injectors, 60,XXX miles on the engine. It has a Master Power 70mm turbo, with inter cooler. Also has a Comp blower cam, specs on it are 232/240 .595/.608 on 115 LSA. Current boost level is 10 psi, the truck has a boost controller capable of adjustments to 16 psi based on current waste gate spring rate (and tune). Professionally tuned *locked* PCM (Nelson performance), so if you want to do your own tuning I will supply an extra PCM. Walbro 255lph fuel pump in the tank. LS1 electric fans. QTP electric cutout.
Transmission is a 4L80E with a 3,000 rpm converter.
Rear differential has TruTrac installed (posi trac).
Truck has approximately 138,XXX miles on it.
The body is in fair condition, with a few dings on the bumpers along with scratches. Comes with 20" wheels. Interior is all black, cloth seats, power windows/doors/mirrors. I bought the truck lowered, so I am unsure of its exact specs. The truck bed is Rhino Lined.
I am asking $12,500 OBO
I’m hoping to get it on the dyno this upcoming week to see what power it is making. I have not taken it to the track.
Last edited by TXjeepTJ; 11-12-2012 at 02:18 PM.
11-12-2012, 02:18 PM
#7
TECH Resident
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Houston
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
not really
new price bump, I lose my company truck this week and would like to have this sold so I can go forth with purchasing a car
Also have dyno numbers. They were getting 6.43 psi reading using their sensor, not sure if that is what my guage was saying (driving around it shows me 10psi). My boost guage may be off. Anyways, putting an actual 10psi to the motor would result in even more power gains.
Last edited by TXjeepTJ; 11-12-2012 at 02:31 PM.
