Trucks and SUV Classifieds All Makes and Models ONLY Trucks and SUV's

2006 CCSB Dmax 4WD Blacked out 20s/35s ***PRICE DROPPED AGAIN!!!***

Thread Tools
 
Search this Thread
 
Old 07-14-2009 | 11:49 PM
  #1  
1slow01Z71's Avatar
Thread Starter
Tin Foil Hat Wearin' Fool
iTrader: (36)
 
Joined: Oct 2004
Posts: 23,204
Likes: 4
From: Austin, TX
Default 2006 CCSB Dmax 4WD Blacked out 20s/35s ***PRICE DROPPED AGAIN!!!***

Its late and Im lazy so these are copy/pastes of my forsale thread(s) on another site but all the info you need is there.

Bought it end of January 08 with 74K on it. Ive since ran it up to just shy of 100K, Ive had no problems with it whatsoever, the only thing its been to the dealer for is the intermediate shaft replacement and a glow plug module reflash. There is absolutely nothing wrong with it all, I would just like to get into an LMM dually if the right buyer comes along. Ive towed 16K with the gooseneck a couple times, its never been abused. Its seen some offroad use at the deer lease but nothing drastic since I have a 4wheeler and 74 bronco for that. Most of the miles on it are highway, I know most people say that but I have a company truck so all my around town driving/errands is done in it. You can view my garage for all the mods done to it and current pics. The cognito upgrades were done about 1500 miles ago. The corsa exhaust WILL be coming off to go on the new truck, I love it and will be putting the factory front pipe back on and whatever cat back I can find unless the new owner buys an exhaust at which time Ill install instead of putting the factory stuff back on. The tires have approx 15K left on them. There are a couple rock chips on the front of the hood and grille but those can be fixed before the new owner pics it up. The stock wheels and tires will be going with it too, they have about 50% tread left, I believe they are 265s. Its got every option except, sunroof, nav and rear dvd. It has a weatherguard chest toolbox in the bed but Im going to take that for the new truck. It has a B&W turnover ball gooseneck hitch in the bed with a brand new ball since I lost the other when the tailgate was down and I had my fifth wheel hitch in.

I have all the stock parts that Ive pulled off the truck with the exception of the factory catback I still have the front pipe with cat though.

I was going to keep it but I cant get rid of the itch for a dually so its back up for sale. The truck currently has a little oevr 103K on it, that will go up to 107K pretty soon as Im making a trip up to Colorado to pick up my elk mount, then another trip to western NM, then another trip to Colorado for Elk bow season. This truck truely does just have a lot of highway miles. Again there is nothing wrong with this truck I just want to get into a dually.

Im asking 26,000, Ill entertain offers, and will consider other deals for taking certain parts off the truck as I can use them on the next one. Anything that is painted/smoothed on the truck can be taken off and swapped for stock if there isnt something you'd like.

Feel free to email me at codyh4356@hotmail.com as that is connected to my blackberry and Ill get any questions faster.

Thanks, Cody

23,000 OBO

All these pics were taken today after I got it cleaned up except for the interior shots

Reflection of my company truck trying to show door ding in passenger side rear door

Over all view of the front end to show some of the chips

Chipping around the bow tie

Two rock chips in the front bumper

Light scratch from a mesquite bush out at my deer lease

Trying to show a scratch abotu 6" below the bed rail

Scratches on tailgate cap from 4wheeler/dirt bike ramps

Normal seat bolster wear on drivers seat

Overall shot of it, damn good lookin truck

Last edited by 1slow01Z71; 08-27-2009 at 09:49 PM.
Old 07-16-2009 | 07:38 PM
  #2  
1slow01Z71's Avatar
Thread Starter
Tin Foil Hat Wearin' Fool
iTrader: (36)
 
Joined: Oct 2004
Posts: 23,204
Likes: 4
From: Austin, TX
Default

Bump!
Old 07-16-2009 | 10:29 PM
  #3  
skyhighsami's Avatar
no title here
iTrader: (8)
 
Joined: Jun 2007
Posts: 2,352
Likes: 3
From: Montgomery, AL
Default

I see you are taking the exhaust off. I finally got the Corsa for mine and will have the catback off mine if you wanted to pick up my stock cat back since you dont have your stock catback. Let me know if you want it
Old 07-17-2009 | 05:57 PM
  #4  
1slow01Z71's Avatar
Thread Starter
Tin Foil Hat Wearin' Fool
iTrader: (36)
 
Joined: Oct 2004
Posts: 23,204
Likes: 4
From: Austin, TX
Default

You've got a long bed so Id have to cut it up, plus shipping would be crazy. I can get a JEGs front pipe back for under 300. Thanks for the offer though, if you were semi local it'd be worth it.
Old 07-17-2009 | 06:28 PM
  #5  
skyhighsami's Avatar
no title here
iTrader: (8)
 
Joined: Jun 2007
Posts: 2,352
Likes: 3
From: Montgomery, AL
Default

Well, depending when you sell your truck I would be coming out to Texas. I was asking 75 or 100 for it I think. I forget I am going to be taking my Samurai to Highland Texas I think to have a guy install the drivetrain and build the suspension.
Old 07-18-2009 | 02:01 AM
  #6  
BLKZ71's Avatar
On The Tree
 
Joined: Aug 2008
Posts: 110
Likes: 0
From: Houston Texas
Default

Old 07-18-2009 | 03:59 AM
  #7  
1slow01Z71's Avatar
Thread Starter
Tin Foil Hat Wearin' Fool
iTrader: (36)
 
Joined: Oct 2004
Posts: 23,204
Likes: 4
From: Austin, TX
Default

Click the link below my name for my garage, there are pics and all mods listed there.


Skyhigh, depending on how the two people who are interested in my truck go, Ill let you know. If I dont post its sold shoot me a PM when you are going to head this way.
Old 07-20-2009 | 10:14 AM
  #8  
BigTex's Avatar
? ? ? ? ? ?
iTrader: (16)
 
Joined: Nov 2001
Posts: 7,126
Likes: 2
From: East of Dallas
Default

Bump for a good looking truck!
Old 07-20-2009 | 07:22 PM
  #9  
ZR1 DREAMING's Avatar
TECH Senior Member
iTrader: (28)
 
Joined: Aug 2005
Posts: 8,277
Likes: 1
From: Ham Lake, MN
Default

Cody... damnit.... that's about exactly what I want/need....
Old 07-21-2009 | 08:07 PM
  #10  
1slow01Z71's Avatar
Thread Starter
Tin Foil Hat Wearin' Fool
iTrader: (36)
 
Joined: Oct 2004
Posts: 23,204
Likes: 4
From: Austin, TX
Default

Well Jordan Im in no hurry to sell the truck, so it may be around since Im not willing to budge much on the price. Ill make you a deal you cant refuse



All times are GMT -5. The time now is 10:33 AM.