2007 NNBS Silverado, Escalade Front End, 23's, Lowered!
02-10-2009, 07:08 PM
#1
12 Second Club
Thread Starter
iTrader: (16)
Join Date: Apr 2006
Location: Texas
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
2007 NNBS Silverado, Escalade Front End, 23's, Lowered, Price Reduced!
I'm kind of undecided right now but I saw a Trailblazer SS that I really like and am hoping to sell the truck before the TBSS sells. My truck is a 2007 Silverado LT with the 5.3 (no DOD), light silver birch metallic with light titanium interior and ebony carpet. The odometer shows right at 40k miles. The front end conversion was done less than a month ago. It consists of:
hood and insulation, fenders, complete grille assembly, front bumper with foglights, headlights, plastic wiper cowl, plastic inner fenders, complete hood latch assembly (including the triangular bars it mounts to), plastic core support cover, and front bumper support/reinforcement bar.
The entire front end was painted and I had the bed repainted due to scuffs from a plastic bedliner along with buffing the whole truck. The mirrors, tailgate handle and plastic tailgate cap have since been painted to match the color of the truck as well (pics to follow tomorrow). The lowering kit is a combination Bell Tech 3 in. front spindle and DJM 6 in. rear flip kit. The truck rides excellent. Wheels are 23 inch Enkei (not sure which style) with 305/40/23 Toyo Proxes. The tires only have about 8k miles on them and have plenty of tread left. No performance mods to speak of other than a little tuning on the trans. for firmer shifts. It has 20% tint all the way around. The interior is stock as well. I'm asking $22000 OBO. Feel free to PM or e-mail me @ nick0549@embarqmail.com if you have any questions. Thanks!
hood and insulation, fenders, complete grille assembly, front bumper with foglights, headlights, plastic wiper cowl, plastic inner fenders, complete hood latch assembly (including the triangular bars it mounts to), plastic core support cover, and front bumper support/reinforcement bar.
The entire front end was painted and I had the bed repainted due to scuffs from a plastic bedliner along with buffing the whole truck. The mirrors, tailgate handle and plastic tailgate cap have since been painted to match the color of the truck as well (pics to follow tomorrow). The lowering kit is a combination Bell Tech 3 in. front spindle and DJM 6 in. rear flip kit. The truck rides excellent. Wheels are 23 inch Enkei (not sure which style) with 305/40/23 Toyo Proxes. The tires only have about 8k miles on them and have plenty of tread left. No performance mods to speak of other than a little tuning on the trans. for firmer shifts. It has 20% tint all the way around. The interior is stock as well. I'm asking $22000 OBO. Feel free to PM or e-mail me @ nick0549@embarqmail.com if you have any questions. Thanks!
Last edited by WFOSS; 02-27-2009 at 08:25 PM.
