96 Chevy Ext cab short bed
11-21-2010, 10:35 PM
#1
Teching In
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
96 Chevy Ext cab short bed
I am looking to sell my 1996 Chevrolet Ext Cab short bed truck. Obviously it's white with blue cloth interior. This is currently what I am driving everyday and I haven’t had a single problem with anything on it since I got it. The truck has 203,000 mles on it but runs great for the miles. I have been getting a constant 16mpg with city driving. The truck does show wear and tear on the body but nothing extremely major. The bed floor is in outstanding shape for it's age and miles.
Since I have had the truck I have done the following: All of these parts were bought brand new from the dealership - grille, parking lights, corner lights, bowtie, head lights, valance on front bumper, driver side exterior mirror, tail gate handle & bezel, wiper blades, Upper and lower radiator hoses, radiator overflow tank, fan belt, air filter, seals on A/C lines, A/C dryer – accumulator, inline A/C filter & rear wheel cylinders. It has a NOS GM rear bumper. I got a brake booster and master cylinder from NAPA (Cardone). New Moog upper ball joints. I also replaced the inner and outer wheel bearings when I lowered the truck. The truck has a brand new windshield aswell. There has been a Magnaflow muffler installed with a turn down right before the rear axle.
The truck is lowered 5/8 using all Belltech components, the rear shocks are Monroe Relex’s. The truck has a custom fabricated notch. The wheels are 15x6 GM steel wheels that have been powder coated gloss black. The center caps are factory 88-98 steel wheel caps. The tires are 235/75R15.
I am looking to sell the truck for $4,500. I have the clear title in hand and is ready to be signed over to the new owner. :shake:
Since I have had the truck I have done the following: All of these parts were bought brand new from the dealership - grille, parking lights, corner lights, bowtie, head lights, valance on front bumper, driver side exterior mirror, tail gate handle & bezel, wiper blades, Upper and lower radiator hoses, radiator overflow tank, fan belt, air filter, seals on A/C lines, A/C dryer – accumulator, inline A/C filter & rear wheel cylinders. It has a NOS GM rear bumper. I got a brake booster and master cylinder from NAPA (Cardone). New Moog upper ball joints. I also replaced the inner and outer wheel bearings when I lowered the truck. The truck has a brand new windshield aswell. There has been a Magnaflow muffler installed with a turn down right before the rear axle.
The truck is lowered 5/8 using all Belltech components, the rear shocks are Monroe Relex’s. The truck has a custom fabricated notch. The wheels are 15x6 GM steel wheels that have been powder coated gloss black. The center caps are factory 88-98 steel wheel caps. The tires are 235/75R15.
I am looking to sell the truck for $4,500. I have the clear title in hand and is ready to be signed over to the new owner. :shake:
Last edited by red02chevy; 07-15-2011 at 08:56 AM.
Thread
Thread Starter
Forum
Replies
Last Post
dry_kill
GMT 800 & Older GM General Discussion
11
08-28-2015 09:53 PM
