FS: 1993 Dodge Dakota
#1
Teching In
Thread Starter
Join Date: Jan 2008
Location: baton rouge louisiana
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
FS: 1993 Dodge Dakota
im selling my pride and joy.
here it is
-Its a 1993 dakota sport package with a 5.2l 318 and an automatic transmission with 148K on the body and motor and less than 30k on the transmission.
Mods:
Ported Holley TB
Pacesetter Shorties
Random High flow Cat
Flowmaster Super 40 w/ turndown after rear axle
Heavy duty built radiator by Rouyeas
Mopar performance PCM
4.10 8.25 posi
K&N drop in
2000 dodge durango rims on lower pro riken raptors
infinity 6x 9's
pioneer cd
clear corners and blinkers
the good:
fresh transmission (under 30K)
new starter, new kyb shocks, new front end ball joints, new power steering pump and reservoir, new fuel sending unit, rear end was just built, new tie rod ends, new control arm bushings, new dash cap, new headliner.
the bad:
truck has usual dents and dings. front passenger quarter panel isnt lined up 100%, driver window comes of track while being rolled up from time to time (needs rubber in the door). front of the bed of the truck has a dent that has snapped. rear bumper is peeling. truck pulls to the left due to driving unaligned for a while so the tires wore wrong (bad bushings, which were replaced) passenger seat has a small hole in it, dash cap could be pinned and fitted better than it is. also has a little rust on one rim and one rim has been curbed. ( im picky about my vehicle)
asking 3,000 OBO
truck was built as a project im sure any mopar fan would appreciate.
asking 3K OBO
1(225)614-1480, name is colby
thanks for lookin guys!
here it is
-Its a 1993 dakota sport package with a 5.2l 318 and an automatic transmission with 148K on the body and motor and less than 30k on the transmission.
Mods:
Ported Holley TB
Pacesetter Shorties
Random High flow Cat
Flowmaster Super 40 w/ turndown after rear axle
Heavy duty built radiator by Rouyeas
Mopar performance PCM
4.10 8.25 posi
K&N drop in
2000 dodge durango rims on lower pro riken raptors
infinity 6x 9's
pioneer cd
clear corners and blinkers
the good:
fresh transmission (under 30K)
new starter, new kyb shocks, new front end ball joints, new power steering pump and reservoir, new fuel sending unit, rear end was just built, new tie rod ends, new control arm bushings, new dash cap, new headliner.
the bad:
truck has usual dents and dings. front passenger quarter panel isnt lined up 100%, driver window comes of track while being rolled up from time to time (needs rubber in the door). front of the bed of the truck has a dent that has snapped. rear bumper is peeling. truck pulls to the left due to driving unaligned for a while so the tires wore wrong (bad bushings, which were replaced) passenger seat has a small hole in it, dash cap could be pinned and fitted better than it is. also has a little rust on one rim and one rim has been curbed. ( im picky about my vehicle)
asking 3,000 OBO
truck was built as a project im sure any mopar fan would appreciate.
asking 3K OBO
1(225)614-1480, name is colby
thanks for lookin guys!
#5
Teching In
Thread Starter
Join Date: Jan 2008
Location: baton rouge louisiana
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
the dash cap i had to order online, it was around a hundred and forty i believe after shipping. just search dash cap and the make and model in google. ive ordered another one for a ram and it also came out god. if you take your time with it it will be very nice. you can order them different colors also. im sure youll be very satisfied!
thanks for the compliments! ive had a trade offer, but the cash would be more convenient when im buying another vehicle. We shall see how it plays out!
thanks for the compliments! ive had a trade offer, but the cash would be more convenient when im buying another vehicle. We shall see how it plays out!
#6
Staging Lane
iTrader: (2)
Join Date: Oct 2003
Location: Hungarian Settlement, Louisiana
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Cool thanks i saw a few on ebay a few times that appeared just to fit over the original cap, was curious and to how they fit now i know. And that is a clean truck if i needed on and had the cash i would buy it in a heartbeat. I have a buddy that has a 94 and we both like the gen I and gen II over any other dakotas
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
FlowmasterMufflers
Dodge Engine & Exhaust Performance
0
09-18-2015 02:31 PM
creekrat
Tuning, Diagnostics, Electronics, and Wiring
2
09-10-2015 12:59 AM