Thinking of selling my Dakota. Its got a brand new 360 with less than 1000 miles on it. Magnum block, Scat crank, polished stock rods with ARP bolts, Wiseco flat tops, Crane compucam, Performer RPM magnum heads, Smith Bros. pushrods, Comp cams pro magnum rockers, M1 intake, 26 lb. injectors, Custom TB, March pulleys, new 904 tranny with manual VB & deep pan, New PTC 9.5" converter, 8 3/4 rear with 742 case, sure grip posi unit, and Moser axles, Cline driveshaft, Hurst shifter, Borla stainless headers, just to name a few items. Truck has new brakes, new rack with power steering, ice cold A/C, etc.... Truck only has 65,000 origonal miles. Everything works including all the factory guages. Also has an ATR air fuel monitor, and adjustable timing controller and rev limiter inside the truck. Also has new tires front and back. Comes with an extra set of 15x8 rear wheels with 28x10.5 slicks. Drive it anywhere and runs 12.50's @ 108 in the 1/4 on motor on regular street radials.

A few more new items include...
Lakewood drag shocks in the front and a new set for the rear still in the box.
Nitrous system-Not even 1 full bottle ran through yet-Been to AMS once and made about 5 passes on the gas.
New MSD 6 box
New seperate fuel system for the nitrous-All done by Coupe Performance
Custom 1 Gallon Cell for race gas-Built by Coupe Performance
New 26x10 Slicks that come with the truck

The truck made 440RWHP on Coupe's Dyno on a small shot. I have driven this truck down I-20, to AMS, and just around town with the a/c kicking. There are no worries when driving this truck. The truck has been 7.90's in the 1/8 on motor on a hard radial tire.

Either sell or trade for something different. I will take $7,000 for the truck like it sits or $6500 with out the nitrous and fuel system.

Couple of other pics
http://www.streetcarforums.com/showt...ghlight=dakota click on the link and scroll down.

Can also email a few more pics. You could not build this truck for anywhere near this cheap!!