Project LSX S10
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Feb 2005
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Project LSX S10
Project LSX S10 for sale. The truck is a 2000 S10 Reg Cab, short bed. It has a 5.3L LS motor with a Texas Speed Cam, 112 lobe sep. 232/234 @ .500 duration. The motor also has comp cam lifters, valve springs and pushrods. The transmission is a Maxwell Turbo 400, manual valve body and a TCI 3500 stall converter. Rearend is a 10 bolt with 3.42's in it.
THIS TRUCK NEEDS FINISHING!!!! It does come with LS1 injectors, however you can run a carb setup, whatever you'd like. Basically it needs a fuel system (comes with a fuel cell) and it's ready to go. Price is pretty firm as I have all of that plus some in the motor and transmission, including the swap.
Everything, including the power steering, power brakes, etc are included they just need to be installed. The truck is located in Upstate, NY in a heated garage.
If you'd like to run fule injectors, you can get an ecm and harness from Fanta141 on here for about $150.00 bucks.
If you don't like my price, make a reasonable offer!
Chris
THIS TRUCK NEEDS FINISHING!!!! It does come with LS1 injectors, however you can run a carb setup, whatever you'd like. Basically it needs a fuel system (comes with a fuel cell) and it's ready to go. Price is pretty firm as I have all of that plus some in the motor and transmission, including the swap.
Everything, including the power steering, power brakes, etc are included they just need to be installed. The truck is located in Upstate, NY in a heated garage.
If you'd like to run fule injectors, you can get an ecm and harness from Fanta141 on here for about $150.00 bucks.
If you don't like my price, make a reasonable offer!
Chris
#6
Teching In
Thread Starter
iTrader: (1)
Join Date: Feb 2005
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Sorry Everyone!!! PRICE REDUCED!!!!
Starting price is $3500.00
No, it does not have an exhaust. It was going to be a twin turbo truck, so everything was going to be made. However, I don't have the time or the money. Truck needs to go to a nice new home!
Starting price is $3500.00
No, it does not have an exhaust. It was going to be a twin turbo truck, so everything was going to be made. However, I don't have the time or the money. Truck needs to go to a nice new home!
Last edited by h0twh3els; 12-31-2012 at 08:23 AM.
Trending Topics
#10
Moderator
iTrader: (19)
thanks, it's not mine anymore though. sold it, and they stole it from the new owner and stripped it. i guess it's time to change my sig. it's in a junk yard somewhere at this point. i'm building a ls swapped s10 now. would you possibly be interested in selling he bed cover?