Roller: (Texas) 03 Silvy SS 4-link, fuel system, coilovers, DBRods built
#1
Thread Starter
Teching In
iTrader: (1)
Joined: Nov 2008
Posts: 47
Likes: 0
From: Houston TX/ Tyler TX
Roller: (Texas) 03 Silvy SS 4-link, fuel system, coilovers, DBRods built
SOLD!
I'm putting my 2003 Silverado SS roller up for sale. The truck was built by Jon at DBRods in Austin, Texas, I ran the truck for about a year and have decided to build something different. The truck is basically a complete truck except engine/trans. I can also deliver the truck to pretty much any where in Texas, and can work out delivery with the buyer. Please feel free to ask any questions or request more pictures.
Please E-mail me at luketrueheart@gmail.com
Specs.
-2003 Silverado SS, Black, Originally AWD w/ roughly 128,000 miles
-DBRods 4-Link suspension with Strange Coilovers
-Moser Fab-9" 35 spline axles, 4.10 gears, Spool
-Front Coilovers (strange), Tubular lower control arms, AWD swapped to RWD
-DBRods 20 Gallon Aluminum Fuel cell w/ fuel filler in bed.
-Complete fuel system (to engine) Areomotive A1000 Fuel Pump, 100 Micron Pre and 40 Micron post filters, -8 feed and return line, black nylon braided hose System has only run E85
-5x4.75 wheel bolt pattern Swap
-18" ZR1 knock off wheels, rears have no tiers, Fronts +90% tread
-15"x10" Jegs 5-Stars with M&H 390's (~50% tread remaining)
-Interior has stock style cloth non power front seats (SS seats are gone but still has center console), rear seat area is gutted. Air fuel gauge in center console, and Areoforce gauge in over-head bin (no nitrous gauge included)
-Widened wheel tubs using stock inner wheel wells & new bed liner
-Stock engine wiring harness that has been stripped to essentials (no O2 sensors, oil level, coolant level, and a few other things)
-Rear mounted battery w/ cutoff switch on rear bumper, and Jumper leads in Fuel door so truck can be charged/jump/get jumped
-Drive Shaft (2-piece) for 4L80e
-Trans Crossmember for 4L80e
-2SOONJR plates not included
Can also include Exhaust
-Custom DBRods 2" Primary headers w/ 3.5" collectors
-Custom DBRods 3" x-pipe exhaust with 2 Magnaflow 16" mufflers
Pics
4-Link
Lower control Arms/front coilovers
Wheel Tubs/bed liner
Jumper posts
Exhaust
At TX2k12
I'm putting my 2003 Silverado SS roller up for sale. The truck was built by Jon at DBRods in Austin, Texas, I ran the truck for about a year and have decided to build something different. The truck is basically a complete truck except engine/trans. I can also deliver the truck to pretty much any where in Texas, and can work out delivery with the buyer. Please feel free to ask any questions or request more pictures.
Please E-mail me at luketrueheart@gmail.com
Specs.
-2003 Silverado SS, Black, Originally AWD w/ roughly 128,000 miles
-DBRods 4-Link suspension with Strange Coilovers
-Moser Fab-9" 35 spline axles, 4.10 gears, Spool
-Front Coilovers (strange), Tubular lower control arms, AWD swapped to RWD
-DBRods 20 Gallon Aluminum Fuel cell w/ fuel filler in bed.
-Complete fuel system (to engine) Areomotive A1000 Fuel Pump, 100 Micron Pre and 40 Micron post filters, -8 feed and return line, black nylon braided hose System has only run E85
-5x4.75 wheel bolt pattern Swap
-18" ZR1 knock off wheels, rears have no tiers, Fronts +90% tread
-15"x10" Jegs 5-Stars with M&H 390's (~50% tread remaining)
-Interior has stock style cloth non power front seats (SS seats are gone but still has center console), rear seat area is gutted. Air fuel gauge in center console, and Areoforce gauge in over-head bin (no nitrous gauge included)
-Widened wheel tubs using stock inner wheel wells & new bed liner
-Stock engine wiring harness that has been stripped to essentials (no O2 sensors, oil level, coolant level, and a few other things)
-Rear mounted battery w/ cutoff switch on rear bumper, and Jumper leads in Fuel door so truck can be charged/jump/get jumped
-Drive Shaft (2-piece) for 4L80e
-Trans Crossmember for 4L80e
-2SOONJR plates not included
Can also include Exhaust
-Custom DBRods 2" Primary headers w/ 3.5" collectors
-Custom DBRods 3" x-pipe exhaust with 2 Magnaflow 16" mufflers
Pics
4-Link
Lower control Arms/front coilovers
Wheel Tubs/bed liner
Jumper posts
Exhaust
At TX2k12
Last edited by sss408; 10-07-2013 at 02:00 PM.