For trade: 99 Silverado ECSB
#1
For trade: 99 Silverado ECSB
Ok guys. I just thought I would throw this out there to see if anyone was interested. My goals are changing and I would like to get into a different truck. I’m not looking to sell right now but wanted to see if anyone would like to trade and I am willing to throw in some cash for the right deal. I am looking for a 1999-2007 RCSB Silverado with a 4.8 or 5.3, stock or lightly modded. Or possibly a Colorado (less likely).
If you are wanting to trade for a fairly fast truck this one is built pretty nice. It has run a best of 14.2 @100MPH. The things holding it back are the stack stall 4l80e and the 3.42 gears. It is really strong on the top end and I have run it up to 150 a couple times with no problems. It would be a great truck to throw a turbo on as it is already set up with a 4l80e and the gears would be right.
So, my truck is a 99 ECSB with 126K miles.
Mods so far;
LQ4 (40K miles)
4l80e (40K miles)
Stock Stall
4” intake
90mm TB
TBSS intake
44lb Marine Injectors
317 Heads shaved .040”
Patroit gold dual valve springs
224/228 110 .600” Cam
7.35” pushrods
Pacesetter Longtubes, 3” ORY with v-bands, 3” dougs stainless cutout.
4” edelbrock cat back exhaust with another 4” magnaflow installed as well.
32” Aluminum radiator with 05+ efans, Blackbear 2-pin harness. I have a 145 amp alternator as well.
Exterior:
Lowered 2-4 with hanger, shackle, and 2” drop coils.
3.42 gears with eaton trutrac
18” Titan rims powder coated grey metallic with smooth centercaps. 265-60-18 Kumho tires.
8K Hids in the Lows and fogs. Have new Hids for the highs and fogs in a box.
2004 tail lights.
Interior:
Denali Cluster
Custom center console sub box.
2- 10” polk audio momo subs with 1 alpine 700W single channel amp
Polk audio db series door speakers with an alpine 360 4 channel amp
Kenwood deck
LC1 afr gauge in a custom made pod in the overhead console.
So if anyone is interested let me know. Ill get a few pics up. The truck is a little dirty now. Also the paint isn’t the greatest there are not many dings but its scratched and has some fender damage from a blowout. And there are any other questions let me know.
Thanks guys.
If you are wanting to trade for a fairly fast truck this one is built pretty nice. It has run a best of 14.2 @100MPH. The things holding it back are the stack stall 4l80e and the 3.42 gears. It is really strong on the top end and I have run it up to 150 a couple times with no problems. It would be a great truck to throw a turbo on as it is already set up with a 4l80e and the gears would be right.
So, my truck is a 99 ECSB with 126K miles.
Mods so far;
LQ4 (40K miles)
4l80e (40K miles)
Stock Stall
4” intake
90mm TB
TBSS intake
44lb Marine Injectors
317 Heads shaved .040”
Patroit gold dual valve springs
224/228 110 .600” Cam
7.35” pushrods
Pacesetter Longtubes, 3” ORY with v-bands, 3” dougs stainless cutout.
4” edelbrock cat back exhaust with another 4” magnaflow installed as well.
32” Aluminum radiator with 05+ efans, Blackbear 2-pin harness. I have a 145 amp alternator as well.
Exterior:
Lowered 2-4 with hanger, shackle, and 2” drop coils.
3.42 gears with eaton trutrac
18” Titan rims powder coated grey metallic with smooth centercaps. 265-60-18 Kumho tires.
8K Hids in the Lows and fogs. Have new Hids for the highs and fogs in a box.
2004 tail lights.
Interior:
Denali Cluster
Custom center console sub box.
2- 10” polk audio momo subs with 1 alpine 700W single channel amp
Polk audio db series door speakers with an alpine 360 4 channel amp
Kenwood deck
LC1 afr gauge in a custom made pod in the overhead console.
So if anyone is interested let me know. Ill get a few pics up. The truck is a little dirty now. Also the paint isn’t the greatest there are not many dings but its scratched and has some fender damage from a blowout. And there are any other questions let me know.
Thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
AUTOT3K
GMT 800 & Older GM General Discussion
10
08-16-2015 06:21 PM
mrgrim
GMT 800 & Older GM General Discussion
0
07-08-2015 08:12 AM