WTT 1993 Corvette for truck!!!!!
03-03-2009, 10:09 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Orlando/ Fort Myers
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
WTT 1993 Corvette for truck!!!!!
Here is the history of the car. Current Miles 153,400
Here are lists of parts that have been changed because they weren't up to par.
AC Delco Parts
Radiator (New Coolant)
Heater Core
All Coolant Hoses
Evaporator
Orifice tube
Accumulator (o-rings)
Alternator
ECM
Console Door
Console Trim
Radio Bezel
Diver Door insert
LCD Lens
Tone generator
Window stop guides
Horns
Spark Plug Wires
Fuel Filter
Bilstien Shocks
Coolant Sensor
Oil Pressure Sensor
Transmission filter
Mobil 1 Cap/Filter
Rotors
DuraStop ceramic pads
Center Stop lamp lens
Pcv and Hose
EGR, EGR solenoid, Vacuum Manifold
Weather strip
New primary cooling fan and two new relays
New starter
New Z51 steering rack
New Universal Joints
New rear main seal
New Oil pump gasket
Tranny rebuilt @ 150,000 Warranty till 162,000
Brand new Opti spark and water pump W/ Warranty
Non Ac-Delco
ZR1-CE wheels 17x9.5
Brand new Nitto 555 less than 2000 miles on them
Corsa Power Pulse 2 cat back exhaust
Dr. Don refurb original Bose gold cd/cass with upgraded CD mechanism
New leather seats on new foam
OEM Glass Targa
Battery
NGK TR55ix's Iridium spark plugs.
I also have a new steering wheel to go on. All these parts have been put on in the past three years. The Optispark and Water pump were done at less than 500 miles ago. It has the 96 wiper and blades done. The oil has been changed every 3000 miles with Mobil 5w-30. This past oil change was replaced with 10w-30. The ignition module, coil, tach filter are new as well. You will also get the original sawblade wheels. The original seats. The car was in a minor fender bender. Pics included. The car has always been zainoed. The windows were recently tinted with 15% up front and 10% in the rear. The intake manifold gasket has been done as well. The throttle cable has been replaced as well. O2 sensors have been done as well. The car is solid inside and out and I have only had a few issues. The car right now has 153,000 miles on it right now. The paint is immaculate and has minor imperfections. If you have any questions about the car let me know. There is much more to the car but have run out of time and energy attached is the pics of the car. Let me know if there is any thing about the car you need to know. Also the two front wheels have some curb rash but are able to be refinished. If there are any specific pictures you want to see let me know so I can take them.
Here are lists of parts that have been changed because they weren't up to par.
AC Delco Parts
Radiator (New Coolant)
Heater Core
All Coolant Hoses
Evaporator
Orifice tube
Accumulator (o-rings)
Alternator
ECM
Console Door
Console Trim
Radio Bezel
Diver Door insert
LCD Lens
Tone generator
Window stop guides
Horns
Spark Plug Wires
Fuel Filter
Bilstien Shocks
Coolant Sensor
Oil Pressure Sensor
Transmission filter
Mobil 1 Cap/Filter
Rotors
DuraStop ceramic pads
Center Stop lamp lens
Pcv and Hose
EGR, EGR solenoid, Vacuum Manifold
Weather strip
New primary cooling fan and two new relays
New starter
New Z51 steering rack
New Universal Joints
New rear main seal
New Oil pump gasket
Tranny rebuilt @ 150,000 Warranty till 162,000
Brand new Opti spark and water pump W/ Warranty
Non Ac-Delco
ZR1-CE wheels 17x9.5
Brand new Nitto 555 less than 2000 miles on them
Corsa Power Pulse 2 cat back exhaust
Dr. Don refurb original Bose gold cd/cass with upgraded CD mechanism
New leather seats on new foam
OEM Glass Targa
Battery
NGK TR55ix's Iridium spark plugs.
I also have a new steering wheel to go on. All these parts have been put on in the past three years. The Optispark and Water pump were done at less than 500 miles ago. It has the 96 wiper and blades done. The oil has been changed every 3000 miles with Mobil 5w-30. This past oil change was replaced with 10w-30. The ignition module, coil, tach filter are new as well. You will also get the original sawblade wheels. The original seats. The car was in a minor fender bender. Pics included. The car has always been zainoed. The windows were recently tinted with 15% up front and 10% in the rear. The intake manifold gasket has been done as well. The throttle cable has been replaced as well. O2 sensors have been done as well. The car is solid inside and out and I have only had a few issues. The car right now has 153,000 miles on it right now. The paint is immaculate and has minor imperfections. If you have any questions about the car let me know. There is much more to the car but have run out of time and energy attached is the pics of the car. Let me know if there is any thing about the car you need to know. Also the two front wheels have some curb rash but are able to be refinished. If there are any specific pictures you want to see let me know so I can take them.
Last edited by GRN ENVY; 03-04-2009 at 10:35 AM.
03-08-2009, 11:09 PM
#6
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Orlando/ Fort Myers
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
I would like a silverado, crew cab if possible but wouldn't mind a a fast reg. cab or a tbss
It is an 86
Last edited by GRN ENVY; 03-08-2009 at 11:23 PM.
Trending Topics
03-15-2009, 12:00 PM
#8
interested in a 1990 454SS? i have over $7k in parts for the truck that have not yet been put on it and not listed in the thread that we can negotiate if you are interested.
https://www.performancetrucks.net/fo...d.php?t=432661
https://www.performancetrucks.net/fo...d.php?t=432661
03-15-2009, 10:55 PM
#9
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Orlando/ Fort Myers
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
interested in a 1990 454SS? i have over $7k in parts for the truck that have not yet been put on it and not listed in the thread that we can negotiate if you are interested.
https://www.performancetrucks.net/fo...d.php?t=432661
https://www.performancetrucks.net/fo...d.php?t=432661