cammed00

iTrader: (2)

Ok here's a rundown

This morning I took a sawsall and cut the mufflers off,and now for some reason the ABS and parking brake lights are on but the parking brake light will come on and off but the ABS light will stay on. Also the turn signal lights are on but they're really dim,but will get alittle brighter as I apply the brake and go back to dim as I let off.

So what do you guys think the problem is because it didn't do it before I cut the mufflers off. Thanks in advance

TXSZ66AVLANCHE

iTrader: (7)

Ok here is what happened

This morning when you cut off the muffler with the sawzall you cut something else also.

wld1985

iTrader: (1)

^ the only thing I could think of..You cut or unplugged something...Get under there and start checking..

rj2

Not necessarily. I have the same problem. My parking brake and abs lights both come on and go off randomly. But everything works fine. I can go down the road and hit a bump and theyll come on and may stay on or may go off. Ive checked everythkng. Its like a short i cant find. Not saying my cause is the same cause i didnt sawzall anything. But somethings going on.

cammed00

iTrader: (2)

I didn't hit any wires or unplug anything. It's just weird why it did it after I cut the exhaust off.

Wide Open

Check/clean the sensors at the front wheels. My old truck did the light thing a couple of times when the front sensors got dirty.

The part about the turn signals and brake lights sounds like a bad ground or something. Going to take some investigating.

Maybe the EBCM (I think that's what it's called) is starting to go bad.

cammed00

iTrader: (2)

It just blows my mind of why it did it after I cut the exhaust off ya know. If I'm thinking of the same part your talkin about I believe it's like $1000 to replace.

Wide Open

Yeah that's the one I'm talking about. IIRC it's mounted back under the truck so the vibration from the sawzall may have sent it over the edge.

cammed00

iTrader: (2)

I hope that isn't the case because I don't have $1k laying around for that

Wide Open

Check your sensors first. If all look connected and clean the dealer can tell you if it's the EBCM or something else.