BlackGMC

iTrader: (31)

I read up on both the AeroForce Scan Gauge and LC-1 wideband and the Gauge has to analog input and the Wideband has two Outputs. So my question is can the wideband be input into the Gauge and read accurately? Has anyone done this? If so can the other outputs be used with LS1 edit or EFI Live?

thunder550

iTrader: (70)

The LC-1 can be programmed to output whatever voltage range you need it to. Makes it very flexible, should be able to get it to work with just about anything that has an analog input. It works very well with EFILive as well.

BlackGMC

iTrader: (31)

thanks for the info. How is it wired into the laptop?

thunder550

iTrader: (70)

There are analog voltage inputs on the side of the interface box that you plug into. EFILive also has pre-made PID's for some of the more common widebands, including the LC-1, so you don't have to make your own.

vanillagorilla

iTrader: (1)

I wonder if mine has the two analog outputs? I bought a little while ago. Hmm...I'm going to ask if I can send it back in if it doesn't. Did you see the shiftlight option on the SRT-4 version. I want that like a fat kid and a donut!!!

How the hell would you get the WB's analog output to jive with the gauge's input? I wonder if the manifold pressure gauge will read boost when I switch to a 2-3bar setup? Oh geez, I'll stop now.