Notices
Tuning, Diagnostics, Electronics, and Wiring HP Tuners | EFILive | Hand Held Programmers | Stand Alone PCM's | Electronics | Wiring Diagrams

AFR bouncing all over

Thread Tools
 
Search this Thread
 
Old 09-15-2008, 03:12 PM
  #1  
Teching In
Thread Starter
iTrader: (2)
 
ttkresurfacing's Avatar
 
Join Date: Nov 2006
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default AFR bouncing all over

Recently I just threw two codes.. p0172 and p0175, both banks running rich. Changed out new maf, new plugs and wires, new fuel pressure regulator, and all new o2 sensors. Nothing has changed at all. Any help to pinpoint the problem would be wonderful. I have a '03 Hummer H2 6.0l, radix 112 running 6 psi, 42lb injectors,90mm tb with Dr. X harness, shorty headers, random technologies high flow cats, gibson exhaust, electric fans, Nelson tuning, NGK TR6 plugs.

Thanks alot,
Tim
Old 09-15-2008, 03:25 PM
  #2  
12 Second Truck Club
iTrader: (7)
 
WJ MARK's Avatar
 
Join Date: Jun 2006
Location: colorado above 6000 ft.
Posts: 2,093
Likes: 0
Received 0 Likes on 0 Posts
Default

My guess would be injectors hanging up, one of my injectors was acting up and A/F was jumping around too. I would check there 1st.
Old 09-15-2008, 03:31 PM
  #3  
Teching In
Thread Starter
iTrader: (2)
 
ttkresurfacing's Avatar
 
Join Date: Nov 2006
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default

Did it throw codes for rich on both banks?

Thanks,
Tim
Old 09-15-2008, 03:52 PM
  #4  
12 Second Truck Club
iTrader: (7)
 
WJ MARK's Avatar
 
Join Date: Jun 2006
Location: colorado above 6000 ft.
Posts: 2,093
Likes: 0
Received 0 Likes on 0 Posts
Default

I don't think so but ive had those codes before, I think the tune was just dumping too much fuel. Alan tuned your truck correct? so it may be on the rich side to be safe.
Old 09-15-2008, 03:59 PM
  #5  
Teching In
Thread Starter
iTrader: (2)
 
ttkresurfacing's Avatar
 
Join Date: Nov 2006
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default

Yeah it's been running great for about 2 yrs then all of a sudden....bam.
Old 09-15-2008, 04:23 PM
  #6  
TECH Junkie
iTrader: (10)
 
charcold-bowtie's Avatar
 
Join Date: Jul 2006
Location: Midland Texas
Posts: 3,198
Likes: 0
Received 0 Likes on 0 Posts
Default

do you have a wideband
Old 09-15-2008, 04:33 PM
  #7  
Teching In
Thread Starter
iTrader: (2)
 
ttkresurfacing's Avatar
 
Join Date: Nov 2006
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes.. it is reading from 10.0 to 20.0... would think it's only my guage but it throws the two codes also.

Thanks,
Tim
Old 09-15-2008, 05:19 PM
  #8  
12 Second Truck Club
iTrader: (7)
 
WJ MARK's Avatar
 
Join Date: Jun 2006
Location: colorado above 6000 ft.
Posts: 2,093
Likes: 0
Received 0 Likes on 0 Posts
Default

I would try putting my old injectors back in to see what it does.
Old 09-15-2008, 07:01 PM
  #9  
Teching In
Thread Starter
iTrader: (2)
 
ttkresurfacing's Avatar
 
Join Date: Nov 2006
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default

Isn't there a way to check the injectors with a Tech 2?

Thanks,
Tim
Old 09-15-2008, 07:52 PM
  #10  
TECH Junkie
iTrader: (10)
 
charcold-bowtie's Avatar
 
Join Date: Jul 2006
Location: Midland Texas
Posts: 3,198
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah I cant remember what its called. It dumps fuel in each cylinder, then you start it up and it smells like **** from being way to rich lol.

injector balance test??


Quick Reply: AFR bouncing all over



All times are GMT -5. The time now is 11:33 PM.