does anyone know a cure for REP mode?
#1
does anyone know a cure for REP mode?
I have an X-link and an 87mm T-body off of a newer truck. I keep going into reduced engine power mode. The last time I got it my codes were P0102, and P1516. The time before that they were P0102, and P2135. It looks like my throttle is only opening to 98.8, and I seem to get it when I go in to WOT. I am currently running a speed density tune in it.
#3
TECH Apprentice
iTrader: (7)
Join Date: Dec 2004
Location: Alvin/Friendswood Texas
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
chances are switching to an ls3/ls7 actual 90mm tb will solve your problem. Motor in the truck tb's is weaker for some reason and when it encounters turbulence from airflow it will go into rep. fought this prob for quite some time with a ton of different TB's. LS3 is the only tb that solved the prob for good.
#7
FormerVendor
iTrader: (6)
Join Date: Nov 2004
Location: BERRIEN CENTER,MICHIGAN
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
chances are switching to an ls3/ls7 actual 90mm tb will solve your problem. Motor in the truck tb's is weaker for some reason and when it encounters turbulence from airflow it will go into rep. fought this prob for quite some time with a ton of different TB's. LS3 is the only tb that solved the prob for good.
This! ^^^ I have seen this before. Not saying that this for sure is your problem but I definately wouldn't count it out.