Help! P0101, P0171, P0174
#1
LS1Tech Whore
Thread Starter
iTrader: (97)
Join Date: Apr 2002
Location: Dallas, Tejas
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
Help! P0101, P0171, P0174
My friend has a 2003 Silverado SS AWD bone stock with only a K&N OE replacement filter (stock tune as well). Its throwing a code P0101, P0171, and P0174. I logged it and sometimes it gets knock retard and sometimes it doesnt. I cleaned out the MAFS with MAFS cleaner but still runs the same. the CATS where replaced about 1 month ago as well but didnt help any. I also sprayed some carb cleaner around the vacuum connections and around the intake ports to check for vacuum leaks but didnt surge or anything.
I also checked the fuel pressure and at idle its 44 psi. At part throttle, it goes up to 50 psi. At wide open throttle, it shoots up to 56 psi and no more. When I turn it off, the fuel pressure goes down to 0 psi in about 2 minutes. I replaced the fuel pressure regulator on the fuel rails but still the same. I also replaced the fuel filter just in case.
Any help is appreciated!
-Jesse
(included are 2 logs)
I also checked the fuel pressure and at idle its 44 psi. At part throttle, it goes up to 50 psi. At wide open throttle, it shoots up to 56 psi and no more. When I turn it off, the fuel pressure goes down to 0 psi in about 2 minutes. I replaced the fuel pressure regulator on the fuel rails but still the same. I also replaced the fuel filter just in case.
Any help is appreciated!
-Jesse
(included are 2 logs)
Last edited by Dirty 30; 11-25-2009 at 10:12 AM.
Trending Topics
#9
LS1Tech Whore
Thread Starter
iTrader: (97)
Join Date: Apr 2002
Location: Dallas, Tejas
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
Do these return style trucks have another fuel pressure regulator in the gas tank?
Would a weak fuel pump cause the fuel pressure to go down to 0 after turning the truck off for 2 mins?
Again, thanks for the help guys! I read thru atleast 20 old threads and everyone seemed to check the same stuff like I did but at the end, no one reported back what the problem was for them.
Would a weak fuel pump cause the fuel pressure to go down to 0 after turning the truck off for 2 mins?
Again, thanks for the help guys! I read thru atleast 20 old threads and everyone seemed to check the same stuff like I did but at the end, no one reported back what the problem was for them.
#10
LS1Tech Whore
Thread Starter
iTrader: (97)
Join Date: Apr 2002
Location: Dallas, Tejas
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
When i reset the fuel trims at idle (they were at +25%), the truck runs very lean and hesitates. I left the fuel trim learn OFF and closed loop OFF and it runs lean as well.