Tuning, Diagnostics, Electronics, and Wiring HP Tuners | EFILive | Hand Held Programmers | Stand Alone PCM's | Electronics | Wiring Diagrams

Keyless Remote

Thread Tools
 
Search this Thread
 
Old 12-18-2006 | 12:47 PM
  #1  
nonnieselman's Avatar
Thread Starter
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default Keyless Remote

What is done when i go to the stealership to get my new keyless remote and they program it to the truck??

Im goin to take a wild guess and say EFI Live cant help in this situation??
Old 12-18-2006 | 03:07 PM
  #2  
bigbadwolf54's Avatar
13 Second Truck Club
iTrader: (14)
 
Joined: Mar 2006
Posts: 402
Likes: 0
From: Bella Vista, AR
Default

Start with the ignition OFF, hold down the power unlock button on the door panel. Turn ignition key ON, OFF, ON, OFF. Release power unlock button on the door panel. The locks will cycle once.
Hold down the keyless entry transmitter LOCK and UNLOCK buttons for 15 seconds. The locks will again cycle once.
Repeat step #2 for each additional keyless entry transmitter.
Turn the ignition on to exit the keyless entry transmitter programming mode. Programming is now complete.

Thats all they do when they program it, must do both at the same time. If this doesnt work they have to use the Tech2 to program them.
Old 12-18-2006 | 06:38 PM
  #3  
nonnieselman's Avatar
Thread Starter
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

Is this for a brand new Remote?
The one that came with the truck kindof got wet when my Foreman and me took scuba diving lessons...

Now im tired of using my freakin key to get in my truck so i went and ordered one through the local stealership... $58ish.
They said $35 to program it.
So i just had to ask on here..

Thanks man im goin to try that first before i put $35 out there..
Old 12-18-2006 | 07:47 PM
  #4  
trever1t's Avatar
2nd fastest 5.3 ECSB
iTrader: (14)
 
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
Default

$35? Some service they give, huh? I would expect them to do it for free damn it!
Old 12-18-2006 | 10:28 PM
  #5  
litreddevil's Avatar
Banned
iTrader: (4)
 
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
Default

Originally Posted by trever1t
$35? Some service they give, huh? I would expect them to do it for free damn it!

this is some of the reasons i quite that **** i would make a copy of how to do it if it happen again and put it in their vehicle.
Old 12-18-2006 | 10:49 PM
  #6  
bigbadwolf54's Avatar
13 Second Truck Club
iTrader: (14)
 
Joined: Mar 2006
Posts: 402
Likes: 0
From: Bella Vista, AR
Default

yeah thats for a new remote or one that has been "found" with the same part number....I work in a dealer<have for 4 yrs> and I'm getting out ASAP for that reason....no one cares bout the customer or employees, just out to make a buck for the dealer principle and upper management, who all make $13,000+/month
Old 12-19-2006 | 07:29 AM
  #7  
ranwalk's Avatar
TECH Addict
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,951
Likes: 1
From: Pearl, Mississippi
Default

Originally Posted by trever1t
$35? Some service they give, huh? I would expect them to do it for free damn it!
He called me and I gave him the price. Then he sent me a pm, I didnt know it was him that called. I would have done it for free knowing who he was. All you phuckers can bitch and moan about bad servie and blah blah blah, but I work on nothing but commission, I am not a charity and I do plenty of **** throughout the day I dont get paid a damn thing for. How about yall go work at your jobs for free and when its time to pay the house note let me know how that works out for you. Have a good day
Old 12-19-2006 | 08:18 AM
  #8  
trever1t's Avatar
2nd fastest 5.3 ECSB
iTrader: (14)
 
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
Default

Originally Posted by ranwalk
He called me and I gave him the price. Then he sent me a pm, I didnt know it was him that called. I would have done it for free knowing who he was. All you phuckers can bitch and moan about bad servie and blah blah blah, but I work on nothing but commission, I am not a charity and I do plenty of **** throughout the day I dont get paid a damn thing for. How about yall go work at your jobs for free and when its time to pay the house note let me know how that works out for you. Have a good day
Come on, that's too funny. What are the odds of that?
Hey, I dont blame you for trying to earn a living.

My reference is my dealership and they would, and do take care of me.
I dont ever get bad service from my dealership but I chose to buy from them because they always take care of me Heck, they still warranty my truck!


No offence ranwalk.
Old 12-19-2006 | 09:49 AM
  #9  
Dock Rocker's Avatar
12 Second Truck Club
 
Joined: Nov 2005
Posts: 1,451
Likes: 0
From: Jackson, MS
Default

Originally Posted by ranwalk
He called me and I gave him the price. Then he sent me a pm, I didnt know it was him that called. I would have done it for free knowing who he was. All you phuckers can bitch and moan about bad servie and blah blah blah, but I work on nothing but commission, I am not a charity and I do plenty of **** throughout the day I dont get paid a damn thing for. How about yall go work at your jobs for free and when its time to pay the house note let me know how that works out for you. Have a good day

I can say that Randy IS one of the GOOD guys. He works hard and does a good job. I think we have all run into the service writer that dosent know **** and is not willing to even do the things in his job description. That is how the "dealer" reputation got there and those guys keep it going. There are plenty of bad service writers out there and Randy is not one of them. He has a job to do to so he has to do what he is told but he also has to make a living just like all of us. Randy is one of the guys that makes you come back to his dealership like was stated above. Dont blame a guy for paying the bills only blame him when he demonstrates the ability to screw up your stuff!
Old 12-19-2006 | 02:46 PM
  #10  
nonnieselman's Avatar
Thread Starter
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

Hey randy, i would rather go up to your place and let you do it and pay you..
I dont like these tards down here..... im goin to try to get up there today or tomorrow..
By the way, these remotes are expensive!!!!!
This one wont be goin ridin 4wheelers with me!

Oh and they Local Stealership down here is charing more than Randy does..
Im goin to give you a call before i head that way..



All times are GMT -5. The time now is 08:55 AM.