Keyless Remote
12-19-2006 | 03:00 PM
#12
screw dealer ship I bought my owen remote start and I can start my truck from I know at least two foot ball fields away and it comes with a pager. I haven't tried farther but for 300 buck install and all I don't think it gets better than that.
12-19-2006 | 03:14 PM
#13
Originally Posted by nonnieselman
oh yea... Randy do you drive the Yellow Nanner to work? 
Come on by and i'll get the remote programmed at no charge
12-19-2006 | 05:05 PM
#14
12 Second Truck Club
Joined: Nov 2005
Posts: 1,451
Likes: 0
From: Jackson, MS
Originally Posted by ranwalk
I usually will drive it to work on Fridays. I plan on driving it this Friday.
Come on by and i'll get the remote programmed at no charge
Come on by and i'll get the remote programmed at no charge
Hey uh Randy do you think I can come by and get one of those ZO6's at no charge.
12-19-2006 | 06:59 PM
#15
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Randy, these instructions worked for me. Thanks for the offer though!!!
""Start with the ignition OFF, hold down the power unlock button on the door panel. Turn ignition key ON, OFF, ON, OFF. Release power unlock button on the door panel. The locks will cycle once.
Hold down the keyless entry transmitter LOCK and UNLOCK buttons for 15 seconds. The locks will again cycle once.
Repeat step #2 for each additional keyless entry transmitter.
Turn the ignition on to exit the keyless entry transmitter programming mode. Programming is now complete.
Thats all they do when they program it, must do both at the same time. If this doesnt work they have to use the Tech2 to program them.""
""Start with the ignition OFF, hold down the power unlock button on the door panel. Turn ignition key ON, OFF, ON, OFF. Release power unlock button on the door panel. The locks will cycle once.
Hold down the keyless entry transmitter LOCK and UNLOCK buttons for 15 seconds. The locks will again cycle once.
Repeat step #2 for each additional keyless entry transmitter.
Turn the ignition on to exit the keyless entry transmitter programming mode. Programming is now complete.
Thats all they do when they program it, must do both at the same time. If this doesnt work they have to use the Tech2 to program them.""
12-19-2006 | 07:48 PM
#16
Need More N2O Mod
Joined: Oct 2003
Posts: 4,382
Likes: 0
From: Not in Koonerville MD anymore
Originally Posted by ranwalk
He called me and I gave him the price. Then he sent me a pm, I didnt know it was him that called. I would have done it for free knowing who he was. All you phuckers can bitch and moan about bad servie and blah blah blah, but I work on nothing but commission, I am not a charity and I do plenty of **** throughout the day I dont get paid a damn thing for. How about yall go work at your jobs for free and when its time to pay the house note let me know how that works out for you. Have a good day
on a side note randy is probably one of the few actual mechanics that works at a dealer now.
Thread
Thread Starter
Forum
Replies
Last Post
Corvette454l88
Trucks and SUV Classifieds
19
09-01-2016 02:24 AM
