TURBHOE

iTrader: (4)

ok i have a ls1 in my truck it has ***** like crazy and still it will not break a second gear bark what am i missing is it just becouse i have shift kit? i have all of tm removed that i can think of. what am i missing this is what i have and more i think. it pulls hard then when it shifts it feels wierd it hard to explain but it wont chirp but if your just driving easy it will kick you back on the shift and on wet pavement it will turn them over ever so slightly.

Zick

iTrader: (18)

Looks like you have HP Tuners right? Have you modified any of the trans tables yet?

When I had my 5.3(stock) and put in a vette servo and played with the trans tables, I could get a 2nd gear bark pretty good. Sometimes it got it at only 1/2 throttle , so I had to back it off somewhat.


But now with my TB stall, it softened up my shift so no more 2nd gear chirps for me until I play with the tune again.

TURBHOE

iTrader: (4)

i played with it some but no joy

bluecajun5.3

iTrader: (31)

yeah, when i had the hypertech with the vette servo i could bust 2nd

TURBHOE

iTrader: (4)

so i need tranny work first?.

Zick

iTrader: (18)

Well for starters I'd put in a Corvette servo. Cheap and easy to do. Took me about 15 minutes to swap out and made a real nice difference for 2nd gear shifts.

TURBHOE

iTrader: (4)

where is a good place to find these at i never could find a good place

TURBHOE

iTrader: (4)

is this http://cgi.ebay.com/ebaymotors/CORVE...spagenameZWDVW what i need?

Zick

iTrader: (18)

Dang, you found one before me.

Here's is a basic writeup on how to install it. http://sethirdgen.org/servo.htm

Flyer

iTrader: (1)

Send me your bin or hpt file and let me lookie.

flyer@woracing.com