Overheating after Efan Install
#1
12 Second Club
Thread Starter
iTrader: (15)
Join Date: Dec 2006
Location: Las Vegas
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Overheating after Efan Install
During my turbo install I yanked the clutch fan to put in some ls1 fans along with a black bear harness. It ran fine for a month but this past week hit 100 and I saw my temps shoot up while in traffic with the AC on. My truck is an 03. The fans dont seem to be moving much air at all. Is there supposed to be a high and low speed for the fans? or is low just 1 fan and high 2?
#6
12 Second Club
Thread Starter
iTrader: (15)
Join Date: Dec 2006
Location: Las Vegas
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the responses. They are def pulling from rad and pushing towards motor. Its a 3 relay harness. And I think they are set to come on at 185-ish. I'll try and ground control wires to see if they are working correctly. thanks again.