Overheating after Efan Install
#11
12 Second Club
Thread Starter
iTrader: (15)
Join Date: Dec 2006
Location: Las Vegas
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Well I changed out the relay. I start the truck and turn on A/C but it still doesnt seem to be blowing Hi speed.
I did the following to test the fans (with key in the run pos)
Relay 1 - grounded pin 85 - both fans at low speed
Relay 2 - grounded pin 85 - fan 2 blows HI speed
Relay 3 - grounded pin 85 - fan 2 blows HI speed
Relay 1 & Relay 2/3 - grounded pin/s 85 - Both fans blows HI speed
I did the following to test the fans (with key in the run pos)
Relay 1 - grounded pin 85 - both fans at low speed
Relay 2 - grounded pin 85 - fan 2 blows HI speed
Relay 3 - grounded pin 85 - fan 2 blows HI speed
Relay 1 & Relay 2/3 - grounded pin/s 85 - Both fans blows HI speed
#12
TECH Addict
iTrader: (3)
Join Date: Dec 2006
Location: Alvin, Texas
Posts: 2,826
Likes: 0
Received 0 Likes
on
0 Posts
Well I changed out the relay. I start the truck and turn on A/C but it still doesnt seem to be blowing Hi speed.
I did the following to test the fans (with key in the run pos)
Relay 1 - grounded pin 85 - both fans at low speed
Relay 2 - grounded pin 85 - fan 2 blows HI speed
Relay 3 - grounded pin 85 - fan 2 blows HI speed
Relay 1 & Relay 2/3 - grounded pin/s 85 - Both fans blows HI speed
I did the following to test the fans (with key in the run pos)
Relay 1 - grounded pin 85 - both fans at low speed
Relay 2 - grounded pin 85 - fan 2 blows HI speed
Relay 3 - grounded pin 85 - fan 2 blows HI speed
Relay 1 & Relay 2/3 - grounded pin/s 85 - Both fans blows HI speed
Did you stack the grounds and mount them together, or mount them independently?
And could you toss a pic in on your wiring? I just installed a custom shroud and I think I missed something, now that I think of it.
Thread
Thread Starter
Forum
Replies
Last Post
ullose272
GMT 800 & Older GM General Discussion
6
07-19-2015 04:14 PM