Problem after installing 60lb's.
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Problem after installing 60lb's.
The truck was running good with the stock injectors till i change them for the
DEKA IV ( DEKA 4 ) Mototron 60lb/hour High Impedance Injectors.
At idle the truck shakes and air fuel goes tup to the 15.8, driving around it drops around 14.3 truck drives good, and i when i get to stop air fuel goes back to the 15's.
CAn it be getting air somewhere since i took off the intake to change the injectors outside.
Have anyone got htis problem??
DEKA IV ( DEKA 4 ) Mototron 60lb/hour High Impedance Injectors.
At idle the truck shakes and air fuel goes tup to the 15.8, driving around it drops around 14.3 truck drives good, and i when i get to stop air fuel goes back to the 15's.
CAn it be getting air somewhere since i took off the intake to change the injectors outside.
Have anyone got htis problem??
#7
10 Second Club
iTrader: (11)
Join Date: May 2005
Location: Glen Carbon, IL
Posts: 1,690
Likes: 0
Received 0 Likes
on
0 Posts
You don't need to replace intake gaskets unless there's something wrong with them.
Are you sure that the injectors are scaled correctly? Did you make any changes to the pulse width?
Are you sure that the injectors are scaled correctly? Did you make any changes to the pulse width?
Trending Topics
#9
What do your fuel trims look like? I put those same injectors in my truck and used all the data from the Banish dvd and had to touch up the ve and maf...I would never swap injectors and just assume the tune is still fine and there's something else wrong, you might end up chasing your tail