charcold-bowtie

iTrader: (10)

your sure you had a gen 3 selected. The other day i messed with a dmax, then tried to get on a gasses and it did around the equivalent of what your sayn

viciousknid

iTrader: (8)

Yup. Gen III every time

viciousknid

iTrader: (8)

Before i got my laptop i was able to power up the V2 scanner by plugging it into my truck. Now if i plug it into the truck by itself it doesn't power on. If i plug it into the laptop i can get it to go to USB Mode but still won't connect to the truck.
I must have a short somewhere but i'm not finding it.

viciousknid

iTrader: (8)

bump
I've updated to 7.5.4 uninstalled and reinstalled the usb drivers. Still only get a connection to the handheld but not to the truck.

kbracing96

iTrader: (26)

Did you check and see if some how you popped the cig lighter fuse?

viciousknid

iTrader: (8)

I'm running a power converter in the lighter slot so i know its good.

I was actually just doing some googling to see if i could find a PCM Fuse for the controller. I will double check the fuses tho

viciousknid

iTrader: (8)

would it be on the side of the dash or under the hood? cuz i can't get under the hood.

kbracing96

iTrader: (26)

If the V2 is not powering up when you plug it in to the obdII port, then thats your problem, you popped a fuse. I'm pretty sure its under the hood.

viciousknid

iTrader: (8)

brother came out. Lighter fuse was blown under the hood.

Funny tho, cuz i've been using the cig lighter on the left to charge my laptop.

viciousknid

iTrader: (8)

bahahahahaha
PIDS are now valid.
p.o.s.
I needa buy some more fuses. had to drop a 25 in the slot cuz its the only thing i had.