thunder550

iTrader: (70)

I think there's a PE mode delay timer setting in there somewhere. Make sure that's set to zero.

53RUSSELL

iTrader: (9)

I will look for after work. I've been in meeting all morning at City Just have been staying out of boost.

KySilverado

iTrader: (7)

There is a bug in the HPT 2Bar SD that will also delay PE when using the Boost PE table.

thunder550

iTrader: (70)

I found the value I was looking for. Make sure that B3608 is set to zero. Also, what is your throttle enable set at? Mine looks like this, worked pretty well for me.

53RUSSELL

iTrader: (9)

B3608 is set to zero already.
Try yours to see what i come with.

53RUSSELL

iTrader: (9)

When the truck was in open loop it would start dropping a/f after 95kpa because of b3647. Now that i went to full closed loop the truck doesn't start dropping intill 115kpa that when the P.E table kicks in. So how do get a/f to start droping at 95kpa? Here is my tune let me know what you think and if you want to see a log file let me know. Pt.net say the log file is to big.

thunder550

iTrader: (70)

OK this table I posted goes into B3616


In B3618 make sure your PE modifier is set to 11.5 AFR or .786 lambda all the way down.

53RUSSELL

iTrader: (9)

Chris i changed that B3613 95 and the a/f looks great now. Here is log file for you guy to look at.

thunder550

iTrader: (70)

Good to hear

Hawk179

iTrader: (1)

There are actually less things to mess with when you are in closed loop.

R