Tuning, Diagnostics, Electronics, and Wiring HP Tuners | EFILive | Hand Held Programmers | Stand Alone PCM's | Electronics | Wiring Diagrams

what codes are these?

Thread Tools
 
Search this Thread
 
Old 05-14-2007 | 09:16 PM
  #11  
Phantom's Avatar
Thread Starter
11 Second Club
iTrader: (16)
 
Joined: Sep 2006
Posts: 5,686
Likes: 23
From: The 405
Default

i use a ground as well to "fire" the solenoid...what do you mean the the relay need nitrous running through it?
Old 05-14-2007 | 09:21 PM
  #12  
dewmanshu's Avatar
Moderately Differentiated
iTrader: (4)
 
Joined: Nov 2004
Posts: 27,563
Likes: 3
From: Maryland
Default

i meant solenoid. if the relay coil is pulling when the truck was off and solenoid was "firing" when the nitrous was off, it will overheat and shorten it's ife drastically.
Old 05-14-2007 | 09:27 PM
  #13  
Phantom's Avatar
Thread Starter
11 Second Club
iTrader: (16)
 
Joined: Sep 2006
Posts: 5,686
Likes: 23
From: The 405
Default

well my solenoids are prolly fucked then...one of these days i'll finish installing that stuff and find out
Old 05-14-2007 | 09:43 PM
  #14  
CHEVRACER83's Avatar
TECH Senior Member
 
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Default

GM HAS HAD ALOT OF PROBLEMS WITH FAILING BATTERY TERMINALS IN THE NEW TRUCKS...

MAY BE WORTH YOUR TIME TO TAKE THEM BOTH OFF AND CHECK THE THREADS ON THE CABLE AND THE BATTERY TOO.... BECAUSE SOMETIMES THE TERMINAL YOU SCREWQ ONTO WILL ACTUALLY START TO BREAK OFF...

EITHER WAY TAKE IT INTO THE DEALER, AND TELL THEM YOU ARE HAVING INTERMITTENT BATTERY PROBLEMS, AND THAT YOU HEARD THERE WAS A BULLETIN OUT ON IT.... THEY WILL CHECK IT OUT..

HERES THE BULLETIN




Subject: Intermittent No Crank, No Start (Clean Battery Side Terminal Stripped Threads, Replace Battery Cable Bolt) #02-06-04-015A - (03/07/2006)



Models: 2001-2007 GM Passenger Cars and Light-Duty Trucks (Including Saturn)

2003-2007 HUMMER H2

2006-2007 HUMMER H3

2005-2007 Saab 9-7X

with Side-Mounted Battery Terminals




--------------------------------------------------------------------------------

This bulletin is being revised to update the models and provide a new labor operation number for this repair. Please discard Corporate Bulletin Numbers 02-06-04-015 and 03-06-03-006A (Section 06 -- Engine/Propulsion System).


--------------------------------------------------------------------------------

Condition
Some customers may comment on an intermittent no crank, no start condition.

Cause
This condition may be due to poor battery cable connections. Cross-threaded/stripped battery cable bolts inside the battery side post terminals may cause poor battery cable connections.

Correction
To avoid replacing the battery , do the following steps:

• Clean the threads in the battery side post terminals using a 3/8" (#16) NC bottom tap.

• Replace the battery cable bolt.

The battery cable bolt is serviced separately from the cable and is available from your Parts Department. Be sure to use the correct bolt
Old 05-14-2007 | 09:48 PM
  #15  
dewmanshu's Avatar
Moderately Differentiated
iTrader: (4)
 
Joined: Nov 2004
Posts: 27,563
Likes: 3
From: Maryland
Default

great point, and since you are there any way with your mysterious falling out tail light, you could kill 2 birds with one beer can.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pimpinpete
GM Engine & Exhaust Performance
43
12-22-2017 09:13 AM
00loudchevy
Tuning, Diagnostics, Electronics, and Wiring
3
12-03-2015 06:54 PM
Avalanche2002
Tuning, Diagnostics, Electronics, and Wiring
7
11-30-2015 08:31 AM
bearden86
GM Engine & Exhaust Performance
26
11-15-2015 04:58 PM
Pimpinpete
GM Engine & Exhaust Performance
3
09-08-2015 08:39 PM




All times are GMT -5. The time now is 07:41 AM.