Post your long range rifles!
08-08-2012, 08:40 PM
#22
On The Tree
Join Date: Aug 2008
Location: Houston Texas
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
My dad gave me his Browning .300 Medallion
with the factory loaded .300 winmag I can group 4" at 300yds
Has a leupold 20x40mm variable scope. Very nice gun. My favorite, specially considering who it came from
with the factory loaded .300 winmag I can group 4" at 300yds
Has a leupold 20x40mm variable scope. Very nice gun. My favorite, specially considering who it came from
08-09-2012, 10:04 AM
#24
TECH Senior Member
iTrader: (10)
Join Date: Oct 2004
Location: Crystal Springs, MS
Posts: 14,068
Likes: 0
Received 2 Likes
on
2 Posts
My grandpa gave me a M1 Carbine, most cherished gun i have.
I love me some 300WM!!
300yds 3 shots
Shot my buddys R700 300Wm and it did the big 3 shot group..ha, he said it was prolly me pulling the shots.. So i got my 300 out and shot a group that a dime covered
Sighting in at 600yds for a match.. 3 shots way off to the right, next 3 were too far left, next 3 were in a lil group close enough to be on paper for the match. Even counting the scope change, its still under 5" at 600, ill take that anyday
Last edited by nonnieselman; 08-09-2012 at 10:11 AM.
08-14-2012, 12:12 PM
#26
I will post pics of my new one when it gets here. Specs below
Trued Remington Milspec 5R action
bolt fluted and tac ****
Timney Trigger set at 1.5LBS
Manners T2 mini chassis stock
Bartlein 26" 5R barrel chambered for 140gr hybrids using Lapua brass no neck turn 260 Rem
badger recoil lug
Seekings 20 MOA base and 4 screw Rings
Vortex Viper PST 6-25 SFP MOA
Harris 6-9 with pod lock
Threaded 5/8 x 24 for brake and can
Badger thruster Brake
All the smith work is being done by Moon@ Crescent Customs formly a head smith at GAP
Rifle is on its way to http://ontargetcustoms.net/ for his ARPA-TAC woodland finish on everything.
Should be a pretty killer looking and shooting combo.
Trued Remington Milspec 5R action
bolt fluted and tac ****
Timney Trigger set at 1.5LBS
Manners T2 mini chassis stock
Bartlein 26" 5R barrel chambered for 140gr hybrids using Lapua brass no neck turn 260 Rem
badger recoil lug
Seekings 20 MOA base and 4 screw Rings
Vortex Viper PST 6-25 SFP MOA
Harris 6-9 with pod lock
Threaded 5/8 x 24 for brake and can
Badger thruster Brake
All the smith work is being done by Moon@ Crescent Customs formly a head smith at GAP
Rifle is on its way to http://ontargetcustoms.net/ for his ARPA-TAC woodland finish on everything.
Should be a pretty killer looking and shooting combo.
08-14-2012, 12:29 PM
#29
Action, Trigger, base, and bolt work bought used (60 rounds) 500
Barrel new 320
Rings new 100
Stock new 700
Smith work, recoil lug, brake, and shipping 665
Paint work and shipping 340
Scope New 700
Bipod and pod lock used 75
Total 3400 exactly.
Bought all items off of snipershide either new from members or slightly used.
If I paid retail it would have been about 4100 plus more in shipping.
The nice thing is the 5R Milspec action comes out of remingtons custom shop and are a bit tighter clearances than the normal actions. This is indicated by the S prefix serial number. You cannot buy these new other than buying the entire 5R Milspec rifle new.
Barrel new 320
Rings new 100
Stock new 700
Smith work, recoil lug, brake, and shipping 665
Paint work and shipping 340
Scope New 700
Bipod and pod lock used 75
Total 3400 exactly.
Bought all items off of snipershide either new from members or slightly used.
If I paid retail it would have been about 4100 plus more in shipping.
The nice thing is the 5R Milspec action comes out of remingtons custom shop and are a bit tighter clearances than the normal actions. This is indicated by the S prefix serial number. You cannot buy these new other than buying the entire 5R Milspec rifle new.