PerformanceTrucks.net Forums
Share Your Pictures with Our Community. Upload Now
0 2024/09/08 17:26:44
0 2024/09/08 17:26:39
0 2024/09/08 17:20:58
This moves tge cable forward and I'm satisfied with clearance.
This moves tge cable forward and I'm satisfied with clearance.
0 2024/09/08 17:20:54
I found that the starter cable could stand to have a little more "air" between it and the header. So I flipped over the harness retaining clip and drilled an existing slot in the brake hose bracket and used the existing bolt, just had to add a nut.
I found that the starter cable could stand to have a little more "air" between it and the header. So I flipped over the harness retaining clip and drilled an existing slot in the brake hose bracket and used the existing bolt, just had to add a nut.
0 2024/09/08 17:20:49
Now there is a mile. Picture angle looks closer than actual. Header also torques away from it on acceleration.
Now there is a mile. Picture angle looks closer than actual. Header also torques away from it on acceleration.
0 2024/09/08 17:20:45
Did a little grinding.
Did a little grinding.
0 2024/09/08 17:20:41
Found a spot during mock up that could use a little clearance. Marked it.
Found a spot during mock up that could use a little clearance. Marked it.
0 2024/09/08 17:20:35
Just needs a little welding.
Just needs a little welding.
0 2024/09/08 17:18:58
0 2024/09/08 17:18:54
0 2024/09/08 17:18:50
0 2024/09/08 17:18:45
Advertisement
Installed headers to mock up in order to figure out a good spot for a wideband bung.
Installed headers to mock up in order to figure out a good spot for a wideband bung.
0 2024/09/08 17:18:40
0 2024/09/08 17:16:43
0 2024/09/08 17:16:38
0 2024/09/08 17:16:34
0 2024/09/08 17:16:29
Headers arrived after 13 weeks. Jet Hot 2000 off-road gray coated Stainless Works 1-7/8 x3" headers with GESI converters and x pipe.
Headers arrived after 13 weeks. Jet Hot 2000 off-road gray coated Stainless Works 1-7/8 x3" headers with GESI converters and x pipe.
0 2024/09/08 17:16:23
0 2024/09/08 09:29:56
0 2024/09/08 09:29:50
0 2024/09/08 09:29:46
0 2024/09/08 09:29:36
0 2024/09/08 09:29:18
0 2024/09/07 16:08:12
0 2024/09/06 10:42:20
0 2024/09/05 20:33:48
0 2024/09/05 20:33:10
0 2024/09/04 21:30:11
New plug wires lubed and heat shields transferred ready to go on. I FINALLY got a tracking number on the headers Tuesday, I'll have them Friday. Of course I'll be out of town for the weekend. I need to install the headers to figure out where I'm going to drill for the wideband bung, then drill it and take it to my welder guy. Then I can start the engine for the 1st time.
New plug wires lubed and heat shields transferred ready to go on. I FINALLY got a tracking number on the headers Tuesday, I'll have them Friday. Of course I'll be out of town for the weekend. I need to install the headers to figure out where I'm going to drill for the wideband bung, then drill it and take it to my welder guy. Then I can start the engine for the 1st time.
0 2024/09/04 18:39:11
I got the ECM and FSCM file back from my tuner and wrote the calibration to the truck.
I got the ECM and FSCM file back from my tuner and wrote the calibration to the truck.
0 2024/09/04 18:39:08
Just waiting for new fog lamps.
Just waiting for new fog lamps.
0 2024/09/04 18:39:03
0 2024/09/04 18:38:58
Advertisement