PerformanceTrucks.net Forums
Share Your Pictures with Our Community. Upload Now
0 2024/09/23 15:07:12
0 2024/09/23 13:06:24
0 2024/09/23 13:02:49
0 2024/09/23 13:02:07
0 2024/09/23 13:01:24
Some additional muffling. Really I have no idea how well this exhaust will sound...
Some additional muffling. Really I have no idea how well this exhaust will sound...
0 2024/09/23 06:47:40
Sadly having to cut into this gem but I'm after a sound not a look. I miss calculated how much more noise headers add over standard manifolds....
Sadly having to cut into this gem but I'm after a sound not a look. I miss calculated how much more noise headers add over standard manifolds....
0 2024/09/23 06:47:35
Final form. I did have to shorten up the pipes coming off of the headers but there was plenty of room. Maintained a slip fit. This kit will come apart in 6 parts. Pretty stoked about that.
Final form. I did have to shorten up the pipes coming off of the headers but there was plenty of room. Maintained a slip fit. This kit will come apart in 6 parts. Pretty stoked about that.
0 2024/09/23 06:47:29
0 2024/09/23 06:47:23
Started in on the exits out of the mufflers. Some pretty interesting angles at this point. Sadly I had to deviate from the 90's and 45's and fire up the Prusa to make a fixture to mark my cuts.
Started in on the exits out of the mufflers. Some pretty interesting angles at this point. Sadly I had to deviate from the 90's and 45's and fire up the Prusa to make a fixture to mark my cuts.
0 2024/09/23 06:47:17
Stuff like this brings me joy. 4 different compound angles to land in a parallel form.
Stuff like this brings me joy. 4 different compound angles to land in a parallel form.
0 2024/09/23 06:47:11
Up and over the axle. This will be welded into one piece. Then the tail pipes will slip onto this with a band clamp and a small tack holding it all together.
Up and over the axle. This will be welded into one piece. Then the tail pipes will slip onto this with a band clamp and a small tack holding it all together.
0 2024/09/23 06:47:05
Advertisement
0 2024/09/23 06:46:59
0 2024/09/23 06:46:52
To get these downward exits parallel was actually easier than I thought.
To get these downward exits parallel was actually easier than I thought.
0 2024/09/23 06:46:45
Mocking up the tailpipes
Mocking up the tailpipes
0 2024/09/23 06:46:38
First of two tails done.
First of two tails done.
0 2024/09/23 06:46:33
Two of two done. Now to bracket them together for the hanger.
Two of two done. Now to bracket them together for the hanger.
0 2024/09/23 06:46:23
0 2024/09/23 06:46:17
Don't mind the bungee.
Don't mind the bungee.
0 2024/09/23 06:46:10
Cleared the Panhard bar. axle and frame nicely. did not test with a spare tire in as the mount is junk so in the bed it stays!
Cleared the Panhard bar. axle and frame nicely. did not test with a spare tire in as the mount is junk so in the bed it stays!
0 2024/09/23 06:46:01
My signature tip layout. Love this vs the Corsa slash.
My signature tip layout. Love this vs the Corsa slash.
0 2024/09/23 06:45:55
All tacked. Brackets made. Hangers made. Ready for final burn in. Just need my 330 tank filled...
All tacked. Brackets made. Hangers made. Ready for final burn in. Just need my 330 tank filled...
0 2024/09/23 06:45:46
my 2020 GMC Denali 6.2
my 2020 GMC Denali 6.2
0 2024/09/21 05:27:06
0 2024/09/20 19:21:18
0 2024/09/19 22:11:31
0 2024/09/19 22:11:27
0 2024/09/19 22:11:24
0 2024/09/19 22:11:20
0 2024/09/19 22:11:15
0 2024/09/19 22:11:12
0 2024/09/19 17:36:27
Advertisement